Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Engine Swap (https://www.thirdgen.org/forums/engine-swap/)

- - Oil Pan Fitment (https://www.thirdgen.org/forums/engine-swap/486086-oil-pan-fitment.html)

BADMAN

07-26-2008 08:46 PM

Oil Pan Fitment

Anyone had experiance using either of these pans on a ThirdGen with a stock crossmember? Any header or starter fitment issues?http://store.summitracing.com/partde...view=32&N=700+ Trying to decide which pan will work the best for my 383 build.
http://store.summitracing.com/partde...5&autoview=sku

BADMAN

07-26-2008 09:01 PM

Re: Oil Pan Fitment

ttt

1985WS6transam

07-24-2010 04:44 PM

Re: Oil Pan Fitment

Im looking for some answers on this also. I built my 383 with a stock pan and stupid cork gaskets, its now leaking and I want to replace the gasket so I was thinking of replacing the Pan also while it is out.
What did you end up doing?

hardyz13

08-12-2010 11:13 PM

Re: Oil Pan Fitment

Did you guys find anything out on what pan to use?

five7kid

08-12-2010 11:48 PM

I don't have any personal experience with those pans, but the kick-outs usually get in the way of 3rd gen exhaust.

red406

08-13-2010 06:50 PM

Re: Oil Pan Fitment

I have a pan similar to the first one. Stock exhaust wont clear pan. Long tube headers are necessary.

hardyz13

08-13-2010 10:48 PM

Re: Oil Pan Fitment

Quote:

Originally Posted by red406 (Post 4640918)

I have a pan similar to the first one. Stock exhaust wont clear pan. Long tube headers are necessary.

Ok thanks guys, I have slp shorty headers with their y pipe, so im having a hard time finding a pan. Surely somebody is running a set up like this.

All times are GMT -5. The time now is 08:35 AM.