327 Vortec (LM7) into 92 f-body what would be needed to put a 327 vortec(LM7 is related to LS1) into a 92 f-body that came w 305 auto tbi 2.72 in the rear. that 327 has almost all part and computer. tia, RS ------------------ (A.K.A FireBird88) AOL SN: Zander0710 1992 Camaro RS 25th anniversary edition Adopted Feb,14 2000 Mods: 14x3 Open element w/ K&N filter, MSD GM blaster Coil and 8.5 SC wires, AFPR, 60psi. Fuel Pressure gauge, 3-Row Al rad. , 180* t-stat, Hooker 1 5/8 headers, 3" Catco cat, 3" Hooker Aero Chamber cat-back, "Ultimate TBI" mods |
Ive never heard of this engine before, I thought the 327s died in '68. Or are you refering to the new 5.3Litres in the trucks? |
Seasoning actually has a specific meaning (or use to)...it means the block is stress-reliefed. |
Sorry.. this is cross-posted from another thread...I haven't seen this problem at www.thirdgen.org in quite awhile. Yes, their is a NEW 327 based on the LS-2 (6.0L iron version of the LS-1). They are found in the new trucks. Regarding the swap.. it would involve the same things as if you were to swap an LS-1 or LS-2. |
why not just go with a standard 350 with Vortec heads? it would probably be a lot easier of a swap, was for me. i simply swapped topend with the dif block. plus im pretty sure can coax more power out of the 350 version, (350-400hp) unless you wanna try something different? thats a cool idea if thats the case. good luck, Jeremy ------------------ 1982 Camaro Z28...$1000 Vortec 350 block rebuilt 20 over.. $900 L31 Vortec heads...$0 xtreme energy comp cam... $200 Edelbrock carb/intake...$500 home made cold air/ram air induction...$0 dynomax headers...$150 flowmaster 3chamber...$250 rebuild diff, 3.73 richmond swap... $900 built 7004r w/ stock converter... $200 Dusting a 2000 GT with my "truck motor"... PRICELESS |
Yes I think he is talking about the 5.3 liter in the new trucks. That would not be a bad motor to put into your F-body considering they put out 285hp. I don't think it would be any different than swapping in an LS1. Not that I have done that swap or know anyone that has but I am sure someone on here has seen it done. |
All times are GMT -5. The time now is 05:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands