Shooting exhaust flames question!
 

Hi guys, is there anything that I can put on my bumper to stop exhaust flames from burning it up? I would like to install a system that shoots flames and before I do it I was just wondering if there was anything I could put to shield it.

Thanks very much!

Re: Shooting exhaust flames question!
 

A Longer exhaust pipe.

Re: Shooting exhaust flames question!
 

:yup:

Re: Shooting exhaust flames question!
 

DEI makes a sticky backed foil type pad that you can stick to almost anything and it'll reflect the heat away.

http://www.designengineering.com/cat...s/reflect-cool

Re: Shooting exhaust flames question!
 

it is a bit harder to put "afterburners" on an injected car, you almost need to inject raw fuel into the pipes because you can not just pump the carb and load it up that way ... one way i did see it done was to have fuel injected into the pipe after the the converter with a piece of steel line with a check valve on it, i would guess the return fuel line would give enough pressure to do the job, as it should just take a few drops

Re: Shooting exhaust flames question!
 

I wouldn't use shielding, if you are doing this on a 3rd gen it deserves to just ignite and end it's misery.

Re: Shooting exhaust flames question!
 

To each his own, man.