Magnaflow - butt ugly tips, shorten them? Paint them? Just installed a new Magnaflow on my 89 IROC. It's a high quality,it went on easy and fits up perfect. I like everything about it except the tips-they stick out too far and they're ugleeee. Any thoughts on how to shorten them up? If I cut them what's the best way to do it and keep the edge of the tip "clean" and not ragged looking? Could they be painted with some black high temp paint? Suggestions welcome. Thanks GT |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? Of course you could paint them, but I doubt that'd fix the ugly. If you dislike them, cut em off. |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? I am currently considering a car with a MF exhaust. I'll have to do something about the tips as well. |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? I bought a pair of Walker replacement tailpipes from Summit and used a pair of B&B tips I had sitting around. I had the inlets of the tips expanded at a local muffler shop. Do the Walker tailpipes and then the Corsa knockoff tips from ebay. The tailpipes were $90. Part numbers WLK-43243 and WLK-43244 Then buy these http://www.ebay.com/itm/PAIR-Stainle...pSRc7p&vxp=mtr |
Re: Magnaflow - butt ugly tips, shorten them? Paint them?
Originally Posted by BOTTLEDZ28
(Post 6027084)
I bought a pair of Walker replacement tailpipes from Summit and used a pair of B&B tips I had sitting around. I had the inlets of the tips expanded at a local muffler shop. Do the Walker tailpipes and then the Corsa knockoff tips from ebay. The tailpipes were $90. Part numbers WLK-43243 and WLK-43244 Then buy these http://www.ebay.com/itm/PAIR-Stainle...pSRc7p&vxp=mtr Post some pics. |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? Stock semi hidden tips look second best behind SLP 2OTL to me. |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? I cut mine back by running tape around it nice and strait exactly where I wanted the cut and use a saws-all with a fine tooth metal blade and finished it of with a fine tooth metal file. Not only did they stick out a little to far but were sharp as razor blades. They are 3in. tips on the Flowmaster "American Thunder" Cat back. The car behind me can still see them and I like it that way. http://imagizer.imageshack.us/v2/640...0/196/c0j9.jpg http://imagizer.imageshack.us/v2/640...2/32400762.jpg |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? 1 Attachment(s)
Originally Posted by chazman
(Post 6027156)
Post some pics. Attachment 320412 The Magnaflow is NOT what I expected. Its really quiet. Almost as quiet as the stock OEM exhaust. I am still running the factor exhaust manifolds and dual cats but had I known it would be this quiet, I would have chosen something else. |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? 2 Attachment(s) |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? |
Re: Magnaflow - butt ugly tips, shorten them? Paint them? Flame throwers ! |
All times are GMT -5. The time now is 11:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands