Power steering and alternator..HELP!
 

Hi everybody.. It's been a while since I've posted but I've run into a problem and was wondering if anybody has pics of what you've done in this situation...

I have a 95 LT1 motor converted to carb, so I'm running the standard 6.75 sbc balancer with a march crank pulley (87' has 1 serpentine and 2 v grooves) this setup is in my 87 Trans am I want to use the 87 power steering pump and alternator (no a/c)

If anyone has a suggestion or pics.. Any help is appreciated

Thanks..

I also posted this in engine swaps...

Re: Power steering and alternator..HELP!
 

I've got an Lt1 in my Z28. Also planned on running v-belt accessories. Alternator will be down low on the passenger side, power steering will be down low on the drivers. I haven't made any bracket or templates yet so I'm really not much help yet. When I get that far (probably in the next couple weeks) I'll update.

Re: Power steering and alternator..HELP!
 

Thanks, if I finish before you I will post the pics..

Re: Power steering and alternator..HELP!
 

Not to raise the dead here, but can you use the stock third gen power steering pump with lt1 accessories?

Re: Power steering and alternator..HELP!
 

Not without redesigning the FEAD

Re: Power steering and alternator..HELP!
 

Gocha. Thanks