test fit/mock up
 

started to finnish the fuel lines
Attachment 320301
front was easy..
Attachment 320302
plate to hold fuel reg
Attachment 320303
temp sending units.and gauges
Attachment 320304
nexed in the NOS lines.might go with a single plate duel stage.insted of the 2 plates set up.
Attachment 320305
lots or room to this point..
Attachment 320306

Re: test fit/mock up
 

Looks awesome

Re: test fit/mock up
 

Yeah, what he said. Nothing better on a race care than neat, well thought out fuel lines/plumbing and electrical wiring.

Also the fuel rail stands look pretty trick. Did they come with FAST fuel rails or did you make them?

The bore/stroke make about 433ci. What hp you shooting for? Dual stage nos should make it pretty awsome.

Re: test fit/mock up
 

You could still go with a dual plate system. Use a controller to activate the second plate shortly after you launch. A dual plate coming on as soon as you go to WOT may be too much torque.

Re: test fit/mock up
 

the mounts are all from fast. as a kit for this intake.
the single plate I'm thinking about. works the same as the 2 plate set up.. its just 1 plate 1" tall/thick holding all the same parts.
passing it off as a 427 sbc
Attachment 320292

Re: test fit/mock up
 

have 2 diff controllers now for the NOS. RPM/time delay from Nos.
will see what works best...also the old stand by button..lol

ea kits good to 250 hit. but it ill never see that more in the ball park of 100 and a 150 hit ea kit..the delay to full power..might be fun but it looks to be hard on the solenoids..