3D Printing Upgrades I don’t really get the chance to post much but I’ve been beginning to gather parts and print some 3d parts in preparation of work when the weather gets nice on my 91 Z28. I posted in the audio thread pics of my double din reversed radio Bezel I printed and am working on still. Here’s some pics... https://cimg7.ibsrv.net/gimg/www.thi...0327f1497.jpeg https://cimg8.ibsrv.net/gimg/www.thi...ef94b6909.jpeg Currently in progress my dad and I are working on making cup holders for the ashtray area. We printed our first test and for my dad’s 88 iroc it turned out nice especially since we will be using a hurst dual gate in his car. It still needs sanded and texture painted like the radio Bezel but here’s some pics... https://cimg1.ibsrv.net/gimg/www.thi...28c70033d.jpeg https://cimg3.ibsrv.net/gimg/www.thi...d7f0a593b.jpeg https://cimg4.ibsrv.net/gimg/www.thi...89b53e491.jpeg Soon to come will be some pics of how this mod can be done for my car as my 91 Z28 is a 5 speed so some other modification to the shifter plate will be needed. Stay tuned! |
Re: 3D Printing Upgrades Also the Bezel pictured with the ashtray cup holders has not been texture painted yet. I like the way the SEM texture paint works and it matches close. Here’s my Bezel for my car already textured and painted so you can see how close it matches. Sorry for the dirty console in the pics... https://cimg0.ibsrv.net/gimg/www.thi...b336df7e8.jpeg |
Re: 3D Printing Upgrades Don't be sorry! It's work in progress, I would expect nothing less. Clean up when your done. That's a perfect spot for much needed cup holders in a car which has none. I might have to try something like that. Awesome idea and looks great. |
Re: 3D Printing Upgrades Have you tried to relocate the heater controls down yet? I tried and couldn't make it work. The cables were to tight in mine. |
Re: 3D Printing Upgrades
Originally Posted by Sleeper Z
(Post 6205795)
Have you tried to relocate the heater controls down yet? I tried and couldn't make it work. The cables were to tight in mine. |
Re: 3D Printing Upgrades I've seen others do it here on TGO but I found it interfered with the deck when I tried to place it in. Mind you I never went under the dash and tried to get slack on them either. |
Re: 3D Printing Upgrades OK, I'm interested. I have an 84 TransAm and I have the Hurst Dual gate also. The shifter plate is different than a Camaro, so I will need to come up with something. Cupholders are a nice idea for that spot, but I don't want to move my coffee every time I need to adjust the heat (my controls will be staying in the stock location). I was planning to put 2 gauges in the ashtray location using these Autometer angled gauge rings. https://static.summitracing.com/glob...-2234_w_ml.jpgVisualize these in the ashtray location, angled toward the driver. And they would not stick up enough to interfere with the radio controls. |
Re: 3D Printing Upgrades Ya and after thinking about it more with mine being a stick, I'm thinking I might be hitting the cups with shifting and my deck is right there. That might get a bit ugly. Dying to find a spot for cup holders though. I like my coffee. |
Re: 3D Printing Upgrades I have seen a post on here where someone used a fold-out cupholder attached to the side of the console. |
Re: 3D Printing Upgrades I've got a design I modeled in AutoCAD for some usb ports where the ashtray mounts. It exports (supposedly) in an .stl file, but I've never done anything like that before. I'm looking for someone with a 3d printer and a camaro to test it out. Can I send you the files? |
Re: 3D Printing Upgrades
Originally Posted by Sleeper Z
(Post 6205809)
Ya and after thinking about it more with mine being a stick, I'm thinking I might be hitting the cups with shifting and my deck is right there. That might get a bit ugly. Dying to find a spot for cup holders though. I like my coffee. |
Re: 3D Printing Upgrades Awesome work. Interested in seeing those with the controls and radio in. I just ordered a reversed bezel. |
Re: 3D Printing Upgrades
Originally Posted by Citation X
(Post 6206352)
Awesome work. Interested in seeing those with the controls and radio in. I just ordered a reversed bezel. |
Re: 3D Printing Upgrades I am also ready for spring weather. I have a lot of little things to get done on mine as well. |
Re: 3D Printing Upgrades
Originally Posted by Citation X
(Post 6206750)
I am also ready for spring weather. I have a lot of little things to get done on mine as well. Same here. This winter is not slipping out the door peacefully though. I may have to wait until April to really start in on anything. |
Re: 3D Printing Upgrades Those look great |
Re: 3D Printing Upgrades Thanks for all the support so far, this snow just won’t go away this year. Being from the Buffalo, NY area it’s always hit pretty hard but it’s still snowing unfortunately so sorry for such slow progress. I attached a few pics of the finished shifter Bezel with cup holders for my 91 z28. I ordered a real leather shift boot with red stiching as well as the real leather cover to apply to my center console lid with matching red stiching. My new shift ball is the z28 ball from hawks with the engraving and it looks nice. Once everything is in the car I will attach some nicer pictures. Here’s a little preview and again please excuse the mess stay tuned for the finished product. https://cimg3.ibsrv.net/gimg/www.thi...f288ef0bb.jpeg https://cimg5.ibsrv.net/gimg/www.thi...372e10d54.jpeg |
Re: 3D Printing Upgrades That looks good and the holders do look deep. Nice job on the blend. |
Re: 3D Printing Upgrades
Originally Posted by Sleeper Z
(Post 6207144)
That looks good and the holders do look deep. Nice job on the blend. |
Re: 3D Printing Upgrades hi are you making the sterio bezel and the cup holders? do these fit a firebird .if thay do im interested in them. |
Re: 3D Printing Upgrades
Originally Posted by senior bear
(Post 6207552)
hi are you making the sterio bezel and the cup holders? do these fit a firebird .if thay do im interested in them. |
Re: 3D Printing Upgrades Top effort. Very cool. |
Re: 3D Printing Upgrades ok thanks keep up the good work |
Re: 3D Printing Upgrades @G92-Z28 - Can you share the 3D printing files? |
Re: 3D Printing Upgrades HI all dumb question .i downloded a file to print a double din for a firebird .personaly have not got a printer .this is licenced .how do i stand on geting this printed with out geting in a hole load of poo .dont get all this clever stuff ! |
Re: 3D Printing Upgrades
Originally Posted by peterc005
(Post 6207621)
@G92-Z28 - Can you share the 3D printing files? http://www.thingiverse.com/thing:2281726 I designed the cup holder set up with the shift Bezel and haven’t shared that currently but I may run a limited supply off for sale. Not sure as of yet. |
Re: 3D Printing Upgrades thanks .mine is a firebird ! id love the cup holders and a double din . |
Re: 3D Printing Upgrades
Originally Posted by senior bear
(Post 6207622)
HI all dumb question .i downloded a file to print a double din for a firebird .personaly have not got a printer .this is licenced .how do i stand on geting this printed with out geting in a hole load of poo .dont get all this clever stuff ! -G92-Z28 Looks good man. Your settings for your prints look like they are working well. |
Re: 3D Printing Upgrades thanks ill give it a go |
Re: 3D Printing Upgrades
Originally Posted by 7thdarkangel
(Post 6207639)
All you have to do is find a 3d printing service and have them print it. If the file is on thingiverse them you can use one of there "apps" to have it printed and shipped to you. -G92-Z28 Looks good man. Your settings for your prints look like they are working well. |
Re: 3D Printing Upgrades
Originally Posted by senior bear
(Post 6207653)
thanks ill give it a go Here’s a firebird double din Bezel on thingiverse if you wanted to take a look. |
Re: 3D Printing Upgrades thats great joined thingiverse cant find how to get it printed .sorry give me a spaner im off and runing .a computer im stuck .thanks for all ya help .all wana do is go to ebay and bye one pay for it and it arives on door step .sory for being stupid ! |
Re: 3D Printing Upgrades So my father and I came up with a way to print a stick shift shift plate with the cup holders and he has installed some leds in the cup holders. We also printed a shift boot plate as then it will be a whole kit. If anyone might be interested in buying one we may make some more to sell. Here’s some pics of the one in progress more info when it’s complete! https://cimg6.ibsrv.net/gimg/www.thi...f6255e993.jpeg https://cimg7.ibsrv.net/gimg/www.thi...9a4919607.jpeg |
Re: 3D Printing Upgrades [QUOTE=G92-Z28;6212200]So my father and I came up with a way to print a stick shift shift plate with the cup holders and he has installed some leds in the cup holders. We also printed a shift boot plate as then it will be a whole kit. If anyone might be interested in buying one we may make some more to sell. Here’s some pics of the one in progress more info when it’s complete! https://cimg6.ibsrv.net/gimg/www.thi...f6255e993.jpeg https://cimg7.ibsrv.net/gimg/www.thi...9a4919607.jpeg[/QUOT E] I am interested,How much? |
Re: 3D Printing Upgrades I also just finished the file and printing a steering wheel adapter cover for an IROC wheel (out of production) and a larger dash emblem. I'm finding the plastic my friend used in his printer is curling/distorting when subjected to periods of Arizona sunlight. What plastic are you using and are you having this issue? Would be terrible to have that big flat panel to warp. If anyone is interested in these files let me know. Of course the emblem can be made smaller (stock size) or bigger. https://farm1.staticflickr.com/790/4...78a5bbfb_c.jpg https://farm1.staticflickr.com/901/4...a277c0f0_c.jpg https://farm1.staticflickr.com/873/4...87b2bdef_c.jpg |
Re: 3D Printing Upgrades [QUOTE=LT1/TA;6212592]
Originally Posted by G92-Z28
(Post 6212200)
So my father and I came up with a way to print a stick shift shift plate with the cup holders and he has installed some leds in the cup holders. We also printed a shift boot plate as then it will be a whole kit. If anyone might be interested in buying one we may make some more to sell. Here’s some pics of the one in progress more info when it’s complete! https://cimg6.ibsrv.net/gimg/www.thi...f6255e993.jpeg https://cimg7.ibsrv.net/gimg/www.thi...9a4919607.jpeg[/QUOT E] I am interested,How much? |
Re: 3D Printing Upgrades
Originally Posted by Tibo
(Post 6212942)
I also just finished the file and printing a steering wheel adapter cover for an IROC wheel (out of production) and a larger dash emblem. I'm finding the plastic my friend used in his printer is curling/distorting when subjected to periods of Arizona sunlight. What plastic are you using and are you having this issue? Would be terrible to have that big flat panel to warp. If anyone is interested in these files let me know. Of course the emblem can be made smaller (stock size) or bigger. https://farm1.staticflickr.com/790/4...78a5bbfb_c.jpg https://farm1.staticflickr.com/901/4...a277c0f0_c.jpg https://farm1.staticflickr.com/873/4...87b2bdef_c.jpg |
Re: 3D Printing Upgrades I'm considering buying a 3D printing. Which printer are you using? |
Re: 3D Printing Upgrades I uploaded an Interior Plastic panel screw 3d file here: https://www.thingiverse.com/thing:3221543 https://cimg9.ibsrv.net/gimg/www.thi...8f57b511e5.jpg Hope you don't mind me posting on your thread. There should be a stickied 3d Printing post where everyone can submit their 3d printed parts. |
Re: 3D Printing Upgrades
Originally Posted by Tibo
(Post 6212942)
I also just finished the file and printing a steering wheel adapter cover for an IROC wheel (out of production) and a larger dash emblem. I'm finding the plastic my friend used in his printer is curling/distorting when subjected to periods of Arizona sunlight. What plastic are you using and are you having this issue? Would be terrible to have that big flat panel to warp. If anyone is interested in these files let me know. Of course the emblem can be made smaller (stock size) or bigger. https://farm1.staticflickr.com/790/4...78a5bbfb_c.jpg https://farm1.staticflickr.com/901/4...a277c0f0_c.jpg https://farm1.staticflickr.com/873/4...87b2bdef_c.jpg |
Re: 3D Printing Upgrades [QUOTE=G92-Z28;6213107]
Originally Posted by LT1/TA
(Post 6212592)
Still trying to figure out pricing should be more info soon. |
Re: 3D Printing Upgrades Would like to know how this is coming along. I'm wanting something for an Auto Shifter (Stock). Would also like to know what printer you are using and material. |
Re: 3D Printing Upgrades Like Campos and Bad Wolf, I would also like to see more of this and possibly purchase one. Very nice. Just add a spot for dual USB ports on the right side of the unit by the right cup holder, and it would fix yet another issue for many of us... |
Re: 3D Printing Upgrades Oh wow these looks awesome. I would love a radio bezel my Camaro. Do you have any for sale yet? |
Re: 3D Printing Upgrades What kind of paint did you use for the texture? I am also planning on printing the radio bezel and cup holders for my Camaro. |
Re: 3D Printing Upgrades Late addition to the game... I created a plug for the ECM harness pass-thru in the passenger side footwell. https://www.thingiverse.com/thing:4239497 |
Re: 3D Printing Upgrades
Originally Posted by ontogenesis
(Post 6360856)
Late addition to the game... I created a plug for the ECM harness pass-thru in the passenger side footwell. https://www.thingiverse.com/thing:4239497 |
Re: 3D Printing Upgrades That’s great.. I’d love to buy one |
Re: 3D Printing Upgrades What about for an automatic transmission car? I would love the cup holders in my 1986 sport coupe, are you planning on making these also?? |
Re: 3D Printing Upgrades Interested in just the cup holder section without the shifter plate. Let me know if that’s available to order. Thanks. |
All times are GMT -5. The time now is 04:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands