Racing Seats So I have a 1987 Trans Am, I want to get racing Seats for it. Do you have any recommendations on what would be a good budget but still decent quality seat? |
Re: Racing Seats I am also looking into racing seats, brackets and adapters. Ive looked at some from Jegs and Summit Racing, as well as on Ebay. I found this thread while searching for more information. If anyone has any input it seems there are those interested. |
Re: Racing Seats Best thing is to do your own research, websites, ebay, and don't rush into anything. A lot of brands, a few legitimate, most knock-offs. And each will have a dozen models/styles or more, upholsteries, etc. Expensive to inexpensive. Could take months to find what you want/like. And few to no place to go to try them on for size, so be conscious of their dimensions. Most will be a tight fit, but that's the idea. Believe it or not, Fry's Electronics sells racing seat chairs, on the sales floor, and some are pretty realistic. A good way to experience what it might feel like to sit in. Bride, Recaro, Corbeau and Sparco are legitimate brands that will cost more than most. Braum, Cypher, NRG, and many other "generic" brands on ebay, with moderate to low prices. Be sure to look into seat brackets and sliders, too. Not likely you'll be able to adapt your factory sliders to racing seats, at least, not easily. A lot of brackets are somewhat generic, designed for a "universal" fit in many vehicles, which means they might not be ideal in 3rdgens. So if a "manufacturer" offers a bracket/slider for its seat, and it fits a 3rdgen(that's important), probably a good idea to get it. Correct-fitting(into the car), good quality brackets and sliders won't be inexpensive. So there's a lot to look at when shopping for aftermarket seats, which is why it's best to do your own research. |
Re: Racing Seats I’ve always liked the Recaro seats. Yea they’re pretty pricey, but you certainly get what you pay for. |
Re: Racing Seats https://cimg0.ibsrv.net/gimg/www.thi...b1fad27447.jpg https://cimg3.ibsrv.net/gimg/www.thi...1508118bb1.jpg ebay racing seats. comfortable and look decent |
Re: Racing Seats
Originally Posted by billybob6110
(Post 6374353)
https://cimg0.ibsrv.net/gimg/www.thi...b1fad27447.jpg https://cimg3.ibsrv.net/gimg/www.thi...1508118bb1.jpg ebay racing seats. comfortable and look decent |
Re: Racing Seats Hey, I purchased some mounts from ebay. They did come in a pair and left / right are different. They bolted straight onto the existing mounting points and come with their own railings. X2 RACING SEAT BASE MOUNT BRACKETS ADAPTER LEFT+RIGHT FOR 82-92 PONTIAC FIREBIRD Sorry, not the best photos. They were for reference when I was working on the interior when it was dark. https://cimg9.ibsrv.net/gimg/www.thi...804a109ca2.jpg https://cimg0.ibsrv.net/gimg/www.thi...6f3f400022.jpg https://cimg1.ibsrv.net/gimg/www.thi...1267806439.jpg https://cimg4.ibsrv.net/gimg/www.thi...7a65640b93.jpg |
Re: Racing Seats Those look ridiculously high off the floor. Not a concern losing headroom I take it? |
Re: Racing Seats I believe what I have actually mount at a very similar height as the original seats. I'm 5'6 and don't have issues. Maybe lean the seat backwards just a tad. |
Re: Racing Seats
Originally Posted by V_350
(Post 6378294)
Hey, I purchased some mounts from ebay. They did come in a pair and left / right are different. They bolted straight onto the existing mounting points and come with their own railings. X2 RACING SEAT BASE MOUNT BRACKETS ADAPTER LEFT+RIGHT FOR 82-92 PONTIAC FIREBIRD Sorry, not the best photos. They were for reference when I was working on the interior when it was dark. https://cimg9.ibsrv.net/gimg/www.thi...804a109ca2.jpg https://cimg0.ibsrv.net/gimg/www.thi...6f3f400022.jpg https://cimg1.ibsrv.net/gimg/www.thi...1267806439.jpg https://cimg4.ibsrv.net/gimg/www.thi...7a65640b93.jpgDR.K. |
Re: Racing Seats The first link is what I have. And correction to my above comment, the seats come with their own railing, not the brackets. I should also note that I drive this car from the right hand side not the left (which is shown in the photos). The brackets are still different for each side. https://www.ebay.com/itm/FITS-82-92-...-/232486720664 |
Re: Racing Seats I just ordered a set for my car that are cheaper and listed for 93-02 cars. I added the link below. ill post up when i get them and install my seats https://www.ebay.com/itm/FOR-93-02-C....c101195.m1851 |
Re: Racing Seats Looking forward to see how it turns out! |
Re: Racing Seats
Originally Posted by V_350
(Post 6379368)
The first link is what I have. And correction to my above comment, the seats come with their own railing, not the brackets. I should also note that I drive this car from the right hand side not the left (which is shown in the photos). The brackets are still different for each side. https://www.ebay.com/itm/FITS-82-92-...-/232486720664 https://www.amazon.com/Camaro-Pontia.../dp/B01FV4V80A
Originally Posted by V_350
(Post 6379572)
Looking forward to see how it turns out! DR.K. |
Re: Racing Seats
Originally Posted by V_350
(Post 6379368)
The first link is what I have. And correction to my above comment, the seats come with their own railing, not the brackets. I should also note that I drive this car from the right hand side not the left (which is shown in the photos). The brackets are still different for each side. https://www.ebay.com/itm/FITS-82-92-...-/232486720664 https://www.amazon.com/Camaro-Pontia.../dp/B01FV4V80A Major bummer! DR.K. |
Re: Racing Seats HAWKS has Cobreau seats and they offer a direct fit bracket. If you plan on actually using the seats for track action, get seats that have a 5th hole for the submarine belt. |
Re: Racing Seats
Originally Posted by QUICKCHICKEN
(Post 6380262)
HAWKS has Cobreau seats and they offer a direct fit bracket. If you plan on actually using the seats for track action, get seats that have a 5th hole for the submarine belt. DR.K. |
Re: Racing Seats I know this sounds dumb but a lot of sanctioning bodies won’t let you race with seats that can recline, so are they really racing seats? Here are some brackets for third and fourth gen Camaros that a kirkey “racing seat” can be used with https://cimg1.ibsrv.net/gimg/www.thi...4975e38fa5.png https://cimg5.ibsrv.net/gimg/www.thi...cb98c7ddbf.png |
All times are GMT -5. The time now is 02:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands