LT1 wiring problem I am helping a buddy wire up his LT1 and we have no power on the ppl starter wire off his c-100. We have power on the starter and every where else it's been awhile since I wired mine up and dont rember what I did but had the same problem, If you try to start it still no power on it any ideals on what to do? |
Re: LT1 wiring problem This comes up alot You need to find where in the line you lose 12v. Grab a meter or test light http://www.austinthirdgen.org/mkport...n8_starter.jpg Fusible link IGN switch Starter relay P/Neutral switch or clutch switch Starter Sometimes a PO will have installed an alarm system then partially removed it adding more switches along the line |
Re: LT1 wiring problem We dont even have power on the fuse box for the starter wire, I dont think we did the starter relay bypass. We have power on IGN, starter,and the fusible link not checked the others. |
All times are GMT -5. The time now is 12:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands