Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   LTX and LSX (https://www.thirdgen.org/forums/ltx-lsx/)
-   -   So you think this is my problem (https://www.thirdgen.org/forums/ltx-lsx/630967-so-you-think-my.html)

keeslinger31 10-17-2011 02:49 PM

So you think this is my problem
 
I got a itch to take my opti off and check it.
Its however really simple in my car, Total of 30 minutes and here's what I found
http://i56.tinypic.com/29go7yo.jpg
All of this troubleshooting the past 2 years looking for a random missfire and randomly running perfect. Hopefully. Do you think that was the problem

Pocket 10-17-2011 04:27 PM

Re: So you think this is my problem
 
Doubtful, but a new cap/rotor cant do anything but help

keeslinger31 10-17-2011 07:05 PM

Re: So you think this is my problem
 
heres the cap http://i53.tinypic.com/s2s6mg.jpg
Its gotta be it

rickyzZ28 10-17-2011 07:19 PM

Re: So you think this is my problem
 
I had one that looked similar to that and it caused similar symptoms to what you are describing. Changed it out and everything was good to go. Mine was on a new GM opti that had less that 1k on it as well. Luckily GM replaced it under warranty because their parts have a 1 year warranty on them. Don't know if they still do that or not, but never hurts to check.

keeslinger31 10-17-2011 10:31 PM

Re: So you think this is my problem
 
This unit has 100k plus on it. Of me driving. but i think its been like this all along.
Thinking of doing a cam swap while im in here.

89rs454 10-17-2011 11:15 PM

Re: So you think this is my problem
 
So what was it doing for you to take these measures? you didn't say in your first post?

89rs454 10-17-2011 11:19 PM

Re: So you think this is my problem
 
Nevermind i read under your picture. Goddamn now i want to change mine out, even though it runs perfect...knock on wood.

keeslinger31 10-18-2011 12:00 AM

Re: So you think this is my problem
 
Ya while looking at the missfire chart on the ethos it would randomly missfire at idle mostly cylinder 2 and 3.Im guessing this is the area that is burned on the cap. but lately it had gotten worse. I already checked plugs and wires. tested the coil and icm all seemed good. Just bought an accel cap on ebay to get me by till i can do more things at once.


All times are GMT -5. The time now is 05:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands