Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Organized Drag Racing and Autocross (https://www.thirdgen.org/forums/organized-drag-racing-autocross/)
-   -   trying to hit 7's (https://www.thirdgen.org/forums/organized-drag-racing-autocross/739316-trying-hit-7s.html)

mike22115 12-04-2016 08:26 PM

trying to hit 7's
 
went to the track today, went 8.5 with a 1.8 60ft on a 100shot on a almost empty bottle.
my goal is to be in the 7's with these gears.3.27 9 bolt
going to get the bottle filled this week and try again on a completely full bottle. also I have the jets for a 150 shot but didn't get a chance to try them before the bottle ran out.
rite now the spray is wired through a progressive controller spraying 35 shot off the line then the full 100 on a 3 second delay then the full 100. I lowered the delay time to 2 seconds so that should also help out a little since it will get the full 100 shot rite at the 60ft but again...bottle ran out so I could try it (of course)
was thinking about doing a exhaust cut out rite after the y pipe and see if that helps but I'm not sure if it will do anything noticeable. ANY help would be awesome

any advice would be great on things I can do this week to get into the 7s even if its a 7.99 ill be happy lol

Orr89RocZ 12-04-2016 08:49 PM

Re: trying to hit 7's
 
What torque converter? What tires?

mike22115 12-04-2016 09:23 PM

Re: trying to hit 7's
 

Originally Posted by Orr89RocZ (Post 6096202)
What torque converter? What tires?

Stock converter I know I'm loosing a lot of time through that. Tires are MT drag radials 26x10.5

Orr89RocZ 12-04-2016 09:36 PM

Re: trying to hit 7's
 
Really need a converter and bring in the nitrous sooner. But need to get the rpms up before giving it all the spray. A converter and hitting it with most all the shot size off the line will greatly drop et.

mike22115 12-04-2016 09:49 PM

Re: trying to hit 7's
 
Yeah that's my next investment probably a 3000 stall. But for now I'm going to do all I can to get it to go as fast as possible with what I have available this week.


Originally Posted by Orr89RocZ (Post 6096229)
Really need a converter and bring in the nitrous sooner. But need to get the rpms up before giving it all the spray. A converter and hitting it with most all the shot size off the line will greatly drop et.


redneckjoe 12-04-2016 10:59 PM

Re: trying to hit 7's
 
some slicks might help and losing some weight? cant hurt to try a cut out.

i'd like to get into the 7's too. ran an 8.7 on motor and 8.3 at 83 with 100 shot.
what was your MPH?

irocman7 12-05-2016 03:37 PM

Re: trying to hit 7's
 
81mph in the 1/8 with a 100 shot? You're not making the kind of power you should be. I had the same combo, with a little bigger cam (280xfi) and running 86 in the 1/8th on motor. Ignition, fuel, tune start there and figure out where your power is going.

1.8 60 foot is not ideal, but not bad. 81 mph in the 1/8 in a 3300 lb car is about ~275 hp. Your motor should be putting out a lot more than ~175 hp on the motor. Have the spark plug wires mixed up? Bad tune?

mike22115 12-05-2016 04:07 PM

Re: trying to hit 7's
 
You know I've been thinking the same thing since I put the car together. It really should be faster than what my times are showing. The tune seems okay AFR on my wideband is rite about where it should be almost all the time deffinetly no crossed plug wires or melted ones

mike22115 12-05-2016 04:09 PM

Re: trying to hit 7's
 
To be honest I think my y pipe is choking the car up a lot the exhaust shop made it and It has a really sharp 90 degree bend coming rite off of the headers into a 3 inch I'll take a pic and post it when I get the chance


All times are GMT -5. The time now is 08:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands