I need spindles! Hi all...I need about 5 pairs of stock spindles. They just need to have good spindle snouts and smooth race locations, otherwise I can clean them up. Let me know what you have, e-mail in profile...thanks! Ed |
Ed, I have a set from a 90 RS, and possibly from an 86 Iroc if i get them off the car before its hauled off........jt |
I'll take both, hit me with a PM when you get them off. Thanks! Ed |
I have a whole bunch. But I don't know what is considered bad snouts so I'll get some pics for you later. Only problem is.... I'm in Hawaii so not sure about how expensive shipping will be. What's your zip code so I can check. |
I have a pair off of an 83 Z28. Make offer and you pay shipping. Will |
Ship to zip is 29715, PMs sent... Ed PS: Bad snouts mean excessive rust and pitting in the areas where the bearings and seals sit, and no big ruts or gouges in them. They must be usable obviously. |
I have one driver's side spindle. Bearing surface flawless, tie rod bore perfect. |
( oops !!! ) |
Hey Ed,........ How many of these do you need ?? I have at least 2 pairs of spindles I can part with....... I'm interested in the LS1 upgrade and will have a 3rd spare set of spindles once I can replace the pair on my car now. ( All I have for the conversion is the LS1 Calipers at this point ! ) I'm pretty sure that all of them are 85 and earlier,........... but I could be wrong !! Send me a PM when you find some time !?!? I'll pull a 'bare' set of spindles from the garage too see what the shipping to your ZIP code will be and include that info in my reply to your PM. ( I'm just too tired to do it tonight !! ) |
Hi John. loonngg time no see. I'm interested in your spindles, I'll get back to you later on today. Ed |
hey ed, i got another set |
hey ed, i got another set |
PM sent. John, sent you mail since I didn't see a PM link below your post, all my ship info is there. Ed |
I've got a set that I will be removing this weekend from an 87 Iroc. |
I'll take them, PM sent. Ed |
Originally posted by ebmiller88 I'll take them, PM sent. Ed Chris :) |
Spindles shipped! |
YOOOOOOOOOO WHOOOOOOOOOOO, ED? You still need some? |
Thanks Roy... I got 3 sets from members (thanks all) and just found 2 sets I didn't know I had...I lose stuff out there. I'll take one more set for now... Chris, I'll send you a PM, and I'll get with you also John. Ed |
Ed, never got your PM. Car and the spindles that were attached to it are now part of the pop can you are drinking out of.............:D Thanks anyway, Chris :) |
Originally posted by dakleenupman Ed, never got your PM. Car and the spindles that were attached to it are now part of the pop can you are drinking out of.............:D Thanks anyway, Chris :) -- Joe |
Need any more? I have a pair I removed from my 87 IROC. Excellent condition... |
At the moment, no. I'll keep you guys posted, thanks. Ed |
OK, I need some again. Looking for at least 10 sets in good shape. LMK.. Thanks! Ed |
i got another set same price as the last |
Hi Ed I have a good set off of a 91 Z28 if you are interested. Thanks. John. |
i have 10 sets, what are you willing to pay, + shipping |
Thanks for the quick responses, I'll get back to you later today. Ed |
Hey Ed. I still have my cores from the kit I purchased. They are on the car, but if you can use them I will pull them apart next weekend (not sure about this weekend, getting ready to move). Just an FYI. K |
how much are you offering? i have 4-5 sets in bakersfield, ca. |
Ken, I can use them, thank you..LMK. Ron, sent PM. |
I still have my set here. If you want them, email an offer at quiktrp@cbcast.com and they are yours. |
Hi Ed Just wanted to see if you are still interested in these. Thanks. John |
Yes, John... I'll PM you tomorrow. Ed |
Originally posted by ebmiller88 Ken, I can use them, thank you..LMK. K |
hey ed do you want the set i have |
Ken, yes that's fine. Intruder, sure...LMK how you'd like to be paid. rdcamer0 (John), sent PM.. Ed |
do you still need a set of spindles? I have a wrecked 90 Iroc that had low miles on it. 56K. I am going to be removing the springs this week. Would you be interested in the spindles? |
do you still need a set of spindles? I have a wrecked 90 Iroc that had low miles on it. 56K. I am going to be removing the springs this week. Would you be interested in the spindles? |
Yes, sent PM...thanks! Ed |
Ed, I still have these in Charlotte. If you want to get them through Mike Webb, let me know. You can give him the money and I will give him the spindles or vice-versa. Or come up to the cruise-in at some point and let me know when or we can meet down by you sometime. |
Sounds good..I'll get with Mike and look into your next cruise in date. Ed |
Thanks all. I got spindles from John, Brad, and Ted. Anyone else have them? I've been swamped lately so I apologize if I haven't gotten back with anyone. Thanks! Ed |
im just curious but what do you do with them? Street rod? |
Hey Ed, Let me know if you need any more. I just picked up two more 91-92 RS Camaros that have not been wrecked in the front..........jt |
Originally posted by 3rdgenmaro im just curious but what do you do with them? Street rod? |
oh. Thats cool. I was just curious. Thanks |
Originally posted by onebinky I still have my set here. If you want them, email an offer at quiktrp@cbcast.com and they are yours. |
Originally posted by ebmiller88 Thanks all. I got spindles from John, Brad, and Ted. Anyone else have them? I've been swamped lately so I apologize if I haven't gotten back with anyone. Thanks! Ed K |
Ed, Did you want second gen spindles? I don't know if you were going to try those yet. Let me know Glen |
All times are GMT -5. The time now is 01:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands