Roll cage. pics inside. Installed chassis engineering 10pt. cage. https://img109.imageshack.us/img109/...ture1230pp.jpg https://img109.imageshack.us/img109/...ture1184kb.jpg https://img109.imageshack.us/img109/...ture1208ry.jpg https://img109.imageshack.us/img109/...ture1247ev.jpg https://img109.imageshack.us/img109/...ture1221lb.jpg |
damn thats huge cowl! |
looks good |
why the huge cowl? the cage looks fantastic |
Hey 92stealthramz28, the cage looks great. I'm working on the 8 point kit--just like yours w/o the halo bar. I noticed you have the stock armrest on the door panels, can you post a pic of how your door bars are installed? I special ordered the door bars with the bend, but I'm still having trouble locating them around the seat and the armrest. Thanks, Boo |
Hey Booboosean, when I installed the cage I had the pillar bars at the bottom angle inwards, so the door bars could clear.With the pad removed there's about an 1/8" clearance. Here's some pics. http://img22.imageshack.us/img22/7206/picture1276ro.jpg http://img22.imageshack.us/img22/9909/picture1262pw.jpg http://img384.imageshack.us/img384/7...ture1173li.jpg |
can you take some close ups of where it goes through the dash? what did you have to modify in the dash to get it to fit through? |
I was going to ask that also. Since the only interior my car has is the dash pad, I hacked the ends off to put my A-piller bars in. I wasn't building a show car :) Your installation does look good though. I like how the a-piller bars tuck tight along the a-piller. I've seen 2 types of cages. One where the halo bar loops around the roof and connects on both ends to the main hoop. The other style has the a-piller bars going up the a-piller, across the rool line and connect to the main hoop. The halo bar is just a bar that runs across the windshield connecting the 2 a-piller bars together. Personally I like that design better but mine is the first style. |
Hey 92stealthramz28, thanks for the great pics (very helpful). You did a great job tucking it in so it's not too visible to the guy in the Mustang that pulls up next to you at a stop light lol. I'm going to try to pull off the installation so that I can use most of the stock interior also. Your tire and wheel combo looks good too. I know this is not the forum for it, but I gotta ask. What wheel offset and tire size are you running in the rear? Thanks, Boo |
92stealthramz28 = So Slow! hahaha!!! Just playin...car really looks great. Now the question is....Is she ready for the SS? |
KagA152, here are some pics of the dash. I had to notch the corners of the dash pad. I removed the a/c, the only part of the dash I had to modify was the metal support bracket that runs along the bottom. The part of the bracket that was cut off help hold the fuse panel & lower dash pad. So, the bracket that I cut off I had to cut & modify in order to install my fuse panel & lower dash pad in it's stock location. Also, I installed the dash bar & in order to clear my instrument cluster I had to bend the ends. http://img229.imageshack.us/img229/2...ture1300gs.jpg http://img229.imageshack.us/img229/6...ture1287pp.jpg http://img229.imageshack.us/img229/1...ture1290zr.jpg Booboosean, I have the convo-pro 15x8.5 w/ 5.5 backspacing. Tire size (street) 26x10 American Racers. (drag) Hoosier 28x9. I had to modify the inner fender by the lower control arms w/ a hammer for clearance. |
good work dude! i love seeing peepz take ust as much time as i do on the fine details :thumbsup: props to you |
Stealth those are some really sweet wheels !!! what model are they??? I'de love to get a set. your roll cage setup looks ALOT like mine. I have an 8 point and I still have the arm rests on my doors. I just made sure that when those bars were welded in place the arm rests were on the doors and the seats were bolted in place to get a true sense of where the bars had to be located to have that setup, little tight getting my seats back on though (PMD seats). |
Center line Convo Pros rear 15x8 w/5.5 backspace front 15x4 w/5.5 backspace. |
All times are GMT -5. The time now is 07:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands