SFCs for an 89 Turbo T/A Being that the trans mount is different and the exhaust is a little different. Is there anyone here that has installed sub frame connectors on a TTA? If so what brand works and what brands don't. |
Re: SFCs for an 89 Turbo T/A
Originally Posted by W72
(Post 3542505)
Being that the trans mount is different and the exhaust is a little different. JamesC |
Re: SFCs for an 89 Turbo T/A 1 Attachment(s) I wanted to use the TDS tubular style(Alston Racing) that connect to the ends of the sub frame and I don't think they'll fit. See pic |
Re: SFCs for an 89 Turbo T/A Very interesting. I've never seen a cross-member like the one pictured. However, if you compare it with the ones in the following link, it "appears" to be situated in the same place on the frame. You might contact Lon at TDS for more info. JamesC |
Re: SFCs for an 89 Turbo T/A
Originally Posted by JamesC
(Post 3543275)
You might contact Lon at TDS for more info. I did...he hasn't replied |
Re: SFCs for an 89 Turbo T/A They're not gonna fit. The alstons attach at the frame rails behind the factory crossmember and the tubing goes downward from there... so you wouldnt be able to put your tranny crossmember back in. I'd go with the Spohn, UMI, or any other connector that installs near the rockers. |
Re: SFCs for an 89 Turbo T/A I have Spohn on my TTA, they fit great. |
Re: SFCs for an 89 Turbo T/A
Originally Posted by JamesC
(Post 3543275)
Very interesting. I've never seen a cross-member like the one pictured. However, if you compare it with the ones in the following link, it "appears" to be situated in the same place on the frame. You might contact Lon at TDS for more info. JamesC Its a TTA specfic peice. TTA's came with 200-4R's which are a bit longer than a 700. |
Re: SFCs for an 89 Turbo T/A go with spohn. On a side note, that is one of the cleanest under bodys I've ever seen on a thirdgen! |
Re: SFCs for an 89 Turbo T/A Lon's (alstom) won't work. I asked Lon about them many years ago for my TTA. Any Spohn style will work, you might like to double check the clearence at the flexbit on the down pipe. You should be fine as you have the stock system. With the THDP (3 inch) system you will have to cut it so the flex bit moves towards the center of the car about one inch or so. I got custom made SFC's similar to Spohn's on my TTA with a THDP and had to modify it slightly to get the clearens needed. |
All times are GMT -5. The time now is 05:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands