backspacing and fittment of a 15 x 10 wheel
 

i know this has been covered many times, and i have searched, but i have not found one defnitive answer.

is it possible to fit a 10" wide wheel on my camaro without doing any tubbing, mini tubbing, excessive hammering, etc. ?

if so, what would i need as far as backspacing goes and other measurements?

Re: backspacing and fittment of a 15 x 10 wheel
 

10" rim, 5.5" backspace.

Does it fit without modifications and hammering? It depends on what size tire you want to put on that rim. Some tires fit with no problems. Others need work.

Re: backspacing and fittment of a 15 x 10 wheel
 

i am thinking DOT slicks (MT ET street's?) what size would work the best? or would something else work better?

Re: backspacing and fittment of a 15 x 10 wheel
 

I'm running 15x10 with 5.5 bs. The tires are Mickey Thompson ET Street Radials 275/60r15. They fit with no rubbing.

Re: backspacing and fittment of a 15 x 10 wheel
 

i just posted pics of a 91z with 15x10s. 5.5bs. probably on the second page.

Re: backspacing and fittment of a 15 x 10 wheel
 

I have weld pro stars (15 x 10) with MT 26x11.5x15 ET streets and i didnt have to do any hammering. Its an 82 i dont know if that matters or not. Thats also at 30 psi, dont know about a lower psi yet.

Re: backspacing and fittment of a 15 x 10 wheel
 

I was running Hoosier quicktime pro 26x11.50x15's without problems and I've gone up to a 28x9x15 Hoosier slick. They both had about the same section width so no sidewall rubbing.

Re: backspacing and fittment of a 15 x 10 wheel
 

U can run a 28x12.5x15 et street also.

Re: backspacing and fittment of a 15 x 10 wheel
 

ive got an 88 Formula with Bogarts 10 x 15 (5.5bs) and 28 x 10.5 slicks.no problems very little massaging needed

Re: backspacing and fittment of a 15 x 10 wheel
 

what springs should be used. mine are old and in bad shape. just got the car so looking forward to doing it right. has anyone ever used a wrinkle wall dot tire

Re: backspacing and fittment of a 15 x 10 wheel
 

over the years ive noticed that the softer the rear spring I run the better the car works.I have 150lbs rear springs right now

Re: backspacing and fittment of a 15 x 10 wheel
 

i have 1996 rear end on my 1992 camaro and looking to put new rims on and need help im looking at bassett rims right now but need to find out back spacing im just now getting into it and still don't make sense to me 15 x 10 would be nice! with white letter mickey thompson tires

Re: backspacing and fittment of a 15 x 10 wheel
 

Hey..Las Vegas Is my Home Town...(Henderson) any way..

ya just bolt them on!
Attachment 344510

see they fit no probs 29x13x15 on a 10" rim
Attachment 344511
bolts right up!
Attachment 344512
like a glove!
Attachment 344513
10.275 inch rim with a 6.5 back space...fits like facty