Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Suspension and Chassis (https://www.thirdgen.org/forums/suspension-chassis/)
-   -   Proportioning Valve Question......... (https://www.thirdgen.org/forums/suspension-chassis/57709-proportioning-valve-question.html)

Customkitt 03-24-2001 10:46 PM
Proportioning Valve Question.........
 
I have a 1984 Pontiac Trans AM, I am looking to increase braking power, if i buy a Wilwood Proportioning Valve, can i remove the stock Proportioning valve and replace it with the Wilwood, or do i need to keep the stock one and use that in conjunction with the Wilwood ?

------------------
Ponys can run, but Birds can fly !!!!

Apeiron 03-25-2001 12:47 AM
I don't think an adjustable prop valve is going to do anything to increase your braking power, it'll just let you vary the bias between the front and rear brakes.

ANDYZ28 03-25-2001 05:04 AM
If you want to increase your braking power. You will need to increase you brakes. ala 1LE or sometimg similar.

------------------
82Z 305 w/comp 270 magnum cam,holly.TH700R4 w/B&M holeshot 2000 converter,& megashifter.1LE front brakes, 9bolt 3.27 w/1LE rear brakes.Aluminum driveshaft,boxed rear susp.poly everything,IROC swaybar+wonderbar. 70mph@2200rpm ASE Master Tech plus L2
also recently obtained a
'69 chevelle SS396 w/Turbo 400,3.31 posi,11.0 to 1, headers,etc. Latest project car,'86 IROC stock 305TPI hit on left side,but not too bad


All times are GMT -5. The time now is 02:06 PM.


© 2024 MH Sub I, LLC dba Internet Brands