STRUT TOWER BRACES Alright guys i've heard everyone talking about how much strut tower braces help i'm ready to buy one NOW you guys tell me the best one to buy for my car its a 86 IROC 305TPI 18k actual miles it will be lowered soon PLEASE HELP ME also my steering has been pulling a little bit to, had it lined up changed ider arm they said it lined up good but i still feel a little pull in the wheel i don't think brakes are sticking either I CAN'T FIGURE IT OUT HELP ME!!!!!! |
i have a MAC strut tower brace $98 chrome two point.for the time being my car has a tbi intake.i'm swapping it for a tpi intake.one of the things i was regreting about this swap was i was going to have to get anouther brace after the swap.now a buddy of mine just bought a 305tpi z28 so i wanted to see if it would fit on his car just to be sure that it didn't fit.well to my surprise it did fit.even with it not bolted down there still was about 1/2" clearence.the brace is for a throddle body or carbed f-body from MAC the same people that make headers and mufflers.like i said it's chrome so it looks good and it's a heafty piece too.i'd bet that you wouldn't find a better brace for the price.if you e-mail me i mite be abill to find the part#TONYSAMS72@aol.com ------------------ 1991 banditt2 firebird #130of#600 |
Yeah i would like to get that part# and check it out i plan on chroming some of the engine on this car anyway mit as way start now!!! |
91 bandit, do you have a number or a internet address for the place where you bought the chrome tower brace and the part number? I have never heard of MAC so I have no idea. Thanks... Erik |
Here is a response I received from Steve Spohn of Spohn performance regarding subframe connectors and strut tower braces. sfc coming out in January and stb's early spring. I think I'll hold of on buying the edelbrock stb. He said they should be around the same price as Edelbrock's stb. ------------------------------------ This is another email he responded to when I asked him the sfc dimensions. He uses the Y design like Kenny Brown. Kenny's are $295.00 The SFCs are made with 1.5" high x 2.5" wide x .120" wall tubing. $195.00 Steve wrote: I like the Eibach[over the Hotchkis], and they are very race proven as being the superior spring among the 3rd and 4thGen crowd. We have SFCs, and they are the best on the market, maybe I'm biased, but they lock the chassis together like no other. Our new site will be up in very early January, we [have]ALOT of new products available that are not on the current site. You can see our SFCs installed at: http://www.spohn.net/sfc They are Part #503, come powder coated, and the price is $195.00. They fully triangulate the chassis. I will also be coming out with a TPI and Carbed STB by very early Spring, it'll be worth waiting for. Let me know if you have any further questions. Thanks. Steve Spohn -------- There you have it guys. I won't be driving my car till spring anyway so I figure I can wait for his stb. Hope this help, Craig |
Bisc, CHECK YOUR TIRES!!! If the alignment was out previously then you probably have crazy tire wear. Swap your front tires and see if the pull goes the other direction. If it does then your tires are poop. ------------------ 84 Camaro ZZ4 with HOT cam. 1.88 60' (12.98 @ 105MPH E.T.) Other Mods: You name it and I have probably changed it. 91 Firebird 5.0L TBI ASE Certified Auto Tech LIVE AND DIE BY THE ALMIGHTY BOWTIE! |
Hey i put a brand new set of tires on car 245/45/16 they said i had a little radial run on tires it helped it some but still pulls a little i thought maybe the flexing in the front may cause some of this what do you all think??????? |
ok for those of you who want the part# for the MAC strut tower brace.part#stc8928292.i got mine from CINCY SPEED WHAREHOUSE here in cincinnati (513)821-2221.i'm looking for a web site for MAC exhust.i'll let you know when i find it ------------------ 1991 banditt2 firebird #130of#600 |
heres mac's homepage i think www.macperformance.com |
If thats wrong address let me know |
http://www.street-dawg-racing.citysl..._305_motor.JPG this STB will fit on a TPI also ------------------ 1991 banditt2 #130 of 600 Project 350 TPI Banditt II http://www.street-dawg-racing.cityslide.com http://photos.yahoo.com/tonysams72 http:/discussion-board.com/GreaterCincinnatiFBodyAssociation |
All times are GMT -5. The time now is 12:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands