Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Suspension and Chassis (https://www.thirdgen.org/forums/suspension-chassis/)
-   -   questions!! some help me out. (https://www.thirdgen.org/forums/suspension-chassis/58195-questions-some-help-me.html)

RARE-ROC-Z 05-17-2001 02:46 PM

questions!! some help me out.
 
ok i got a set of monroe sensor-trac sturts from a friend out of his parts car, they are said to only have a few thousand miles and they have more compression than my stock ones (with 108,00 miles on my stocks), and i got a set of Gabriel gas shocks and a set of Monroe senatrac shocks, both sets are for the back i got them for $3 each, at a swap meet, they are both 95%, the gabriels were only on the car for three runs at the track, and the monroes for 1000 miles, i know the guy so i trust him also on those figures.

ok my question is, i went to the performance shop here in my area to see about my SFC's and Struts/shocks installed and they said $180 for the struts and shocks, is that about normal, or can i do this myself, and if so do i need any special tools, i am pretty handy, and i have access to basically any tools in the world. and i have access to a lift also!
and do i need to replace the plates that the struts bolt to, i think they have a bearing in them, should they be replaced? thanks anyone, and any suggestions will help!

------------------
Jarrad
1990 IROC-Z L98 350 TPI
TH-700R4
G92- 9 Bolt Borg-Warner 3.27gears
Bright Red Hardtop/ Grey Custom Interior

mods: AFPR, B&M megashifter-HD4ft cable, Underdrive Pulleys, Ported plenum, K&N's, Magnaflow muffler, Aluminum Driveshaft, Gutted Air Boxes w/ Ram Air, and more!!
soon to have new PAINT, and suspension work

DAILY DRIVER: 1991 S10 2.5L/5SPD -

ebmiller88 05-17-2001 02:55 PM

Man, do it yourself and save the money. It'll only take you part of an afternoon. Just follow the manual. (I assume you have one.) If you're like me, I'd rather do it myself in 4 or 5 hours than pay someone 2 bills to do it in 2 hours.

RARE-ROC-Z 05-17-2001 06:33 PM

yeah but do i need any special tools? or new bearings?

and i will always atleast try to tackle something for my self! that is the way you learn!

------------------
Jarrad
1990 IROC-Z L98 350 TPI
TH-700R4
G92- 9 Bolt Borg-Warner 3.27gears
Bright Red Hardtop/ Grey Custom Interior

mods: AFPR, B&M megashifter-HD4ft cable, Underdrive Pulleys, Ported plenum, K&N's, Magnaflow muffler, Aluminum Driveshaft, Gutted Air Boxes w/ Ram Air, and more!!
soon to have new PAINT, and suspension work

DAILY DRIVER: 1991 S10 2.5L/5SPD -


All times are GMT -5. The time now is 08:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands