installed a 9bolt sits lower in the rear ive noticed after doing the 9bolt swap that the car sits lower in the rear then it used to the headlights used to be properly aimed level made a good pattern now the highway signs glow alot more then they used to lol i re installed the springs and bushing like they came out do the mounts sit lower on the 9bolt housing? do i need a thicker sized bushing for body to spring mount? its not like i lowered the car 3 inchs or anything just like 1inch to an 1 1/2 i know it dosnt help that i already had alum heads upfront it just wanst like this with the 10 bolt what did i do wrong? |
Re: installed a 9bolt sits lower in the rear There should be no difference in stance between the 9- and 10-bolt if you reassembled correctly using the same parts. JamesC |
Re: installed a 9bolt sits lower in the rear Rear springs are indexed too, kif they are eeversed they ca will sit differently. Rotate the 180 and see what happens |
Re: installed a 9bolt sits lower in the rear
Originally Posted by //<86TA>\\
(Post 5610300)
Rear springs are indexed too, kif they are eeversed they ca will sit differently. Rotate the 180 and see what happens JamesC |
Re: installed a 9bolt sits lower in the rear the car used to sit with rise to the rear now it ie 3 finger gap front wheel to finger 4 finger gap rear wheel to quarter now it sits the same its not super noticeible other then now the lights are aimed high all ive done was the rear axle swap |
All times are GMT -5. The time now is 01:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands