well my fuel line is leaking so im going bradide stainless steel so Anybody know all the part numbers for the stainless steel lines and adapters for the tbi fuel line and return line i need the adapter from the hard metal line that connects to the rubber line. |
Check on Z28 boy's website, z28boy.cz28.com , he has a great tech write up on it with pn's and instructions. |
That and you can also go into your local GM parts shop and they will actually print out a page with all the numbers on it for you. They did it for me for a few things and they don't charge ya a penny... Bruce (90RS305) |
I covered the braided stainless steel fuel line setup a while ago. It is here: https://www.thirdgen.org/techbb2/sho...58#post1443458 S-D |
good job but my RUBBER FUEL lines are leaking not my metal ones the rubber ones are also going to get the bradided treatment. |
Re: well my fuel line is leaking so im going bradide stainless steel so Originally posted by tbfirebird i need the adapter from the hard metal line that connects to the rubber line. good job but my RUBBER FUEL lines are leaking not my metal ones the rubber ones are also going to get the bradided treatment. Also, capitalization and punctuation help avoid confusion. S-D |
Your better off getting replacement rubber lines from a dealer or equivelent rather than try to hunt down metric adapters for the flexable lines. The metric adapters are custom order , if you intend to do it, you should just call holley or aeroquip directly. :rolleyes: |
Originally posted by tbfirebird good job but my RUBBER FUEL lines are leaking not my metal ones the rubber ones are also going to get the bradided treatment. 9894DBH Female 14mm x 1.5" to -6: Fuel Injection Female "O" Ring Seal 9894DBJ Female 16mm x 1.5" to -6: Fuel Injection Female "O" Ring Seal http://www.holley.com/HiOctn/ProdLin...A/9894DBH.html Then whatever -6 AN hose ends and hose of your choice. RBob. |
go to this guys web page he already did the hard work for you in finding all the parts . http://z28boy.cz28.com/ Hope this helps Nick |
Originally posted by RBob Two each of the following: 9894DBH Female 14mm x 1.5" to -6: Fuel Injection Female "O" Ring Seal 9894DBJ Female 16mm x 1.5" to -6: Fuel Injection Female "O" Ring Seal http://www.holley.com/HiOctn/ProdLin...A/9894DBH.html Then whatever -6 AN hose ends and hose of your choice. RBob. |
All times are GMT -5. The time now is 09:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands