89 RS/ New to TBI tech Im restoring an 89 RS with a 305 TBI....have had high idle issues,searched for vacuum leaks,replaced base gasket,didn't help. Was out yesterday,started the car,idle was suddenly decent,backed out of spot,put into drive and engine stalled. Tried to restart,cranks fine,getting fuel,but won't start. I know this could be multiple issues,would appreciate a more knowledgeable opinion on where to start....thx |
Re: 89 RS/ New to TBI tech Are you getting a check engine light? If so, what codes does it show? |
Re: 89 RS/ New to TBI tech No engine light at start up,but after driving about 10 minutes,yes. Other than the high idle,was running fine until yesterday's episode?? |
Re: 89 RS/ New to TBI tech Tried to get codes by jumping the port,not getting any response,must be a larger problem.... |
Re: 89 RS/ New to TBI tech
Originally Posted by JoeProbasco23
(Post 6026497)
No engine light at start up,but after driving about 10 minutes,yes.
Originally Posted by JoeProbasco23
(Post 6026497)
Other than the high idle,was running fine until yesterday's episode??
Originally Posted by JoeProbasco23
(Post 6026544)
Tried to get codes by jumping the port,not getting any response,must be a larger problem.... |
Re: 89 RS/ New to TBI tech Connected a wire from slot A to B,turned the key to ON position,start up lights came on as normal,but no flashing sequence and no codes. Engine light was coming on after about 10 minutes of driving,but wasn't causing any change in how she was running. Went back to basics last night and checked for spark and there wasn't any,so now I'm thinking ICM? Did have the high idle issue,which seemed to go away seconds before she died,so I'm not sure if that's related. Going to throw on a new ICM this morning and see where I'm at........thx |
Re: 89 RS/ New to TBI tech FYI....appreciate the help...I'm a gearhead from the 70/early 80's and I missed out on third gen tech having exwives and kids,so I'm sure you'll see me plenty! |
Re: 89 RS/ New to TBI tech Are ALL of the fuses good? |
Re: 89 RS/ New to TBI tech Fuses r good,tested the ICM,it was bad,replaced,still not starting...cranks,getting fuel,and still not getting any feedback checking codes? |
Re: 89 RS/ New to TBI tech got it! Was the inline ECM fuse....thx for the info gyz |
Re: 89 RS/ New to TBI tech
Originally Posted by JoeProbasco23
(Post 6026743)
got it! Was the inline ECM fuse....thx for the info gyz |
Re: 89 RS/ New to TBI tech Thx,took a day and a half,but I was fearin something worse..... |
All times are GMT -5. The time now is 03:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands