Third Generation F-Body Message Boards - VAFPR Question in concern to the EBL, Calling RBob...

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- TBI (https://www.thirdgen.org/forums/tbi/)

- - VAFPR Question in concern to the EBL, Calling RBob... (https://www.thirdgen.org/forums/tbi/742651-vafpr-question-concern-ebl.html)

Rocket-Doc

04-11-2017 05:18 PM

VAFPR Question in concern to the EBL, Calling RBob...

Hey guys I have a question. When setting my VAFPR am I supposed to set the fuel pressure with the hose connected to the vacuum line or disconnected?

I'm guessing connected right? As vacuum decreases the FP should increase correct?

RBob	04-12-2017 12:11 PM

Re: VAFPR Question in concern to the EBL, Calling RBob...

Set the fuel pressure with the vacuum line disconnected.

RBob.

Rocket-Doc

04-12-2017 12:25 PM

Re: VAFPR Question in concern to the EBL, Calling RBob...

So I'm going to guess that all of my popping out the exhaust from a rich mixture is going to magically go away once I do this...

RBob	04-13-2017 09:26 AM

Re: VAFPR Question in concern to the EBL, Calling RBob...

Quote:

Originally Posted by Rocket-Doc (Post 6127423)

So I'm going to guess that all of my popping out the exhaust from a rich mixture is going to magically go away once I do this...

Possibly. If you ran VE Learns that should have dropped the VE table to make up for the excess fuel pressure.

RBob.

All times are GMT -5. The time now is 10:38 AM.