¿Gasket?
 

What is the compressed thickness of a FelPro 7733-PT2? 0.021"?

IIRC thats the factory replacement 350 head gasket? If so, its .039 like everything else Fel-Pro sells.

O.K. I was hoping it might be a different size, like the FelPro:

-P/N----BORE----THICK

1003----4.166----0.041
1004----4.190----0.041
1044----4.200----0.051
1034----4.200----0.041
1094----4.100----0.015
1014----4.200----0.039

But it is listed as the factory replacement, so it's probably the 4.100/.039".

Those are the 'performance' gaskets, if you want to call them that.
I have a set at home, I can measure them if you really want. I know though that their stock replacement SBC stuff is the blue no retorque standard issue .039 compressed. I might even be able to dig up a Fel Pro spec book.

Max,

Thanks, but don't waste any extra time. That should be close enough for what I'm doing. I could find data on the "performance" gaskets, but not the "standards". I just wanted to make sure it wasn't like the GM factory 0.021" gasket for the L81.