Third Generation F-Body Message Boards - plugs for dart iron eagle 215's angled heads

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Tech / General Engine (https://www.thirdgen.org/forums/tech-general-engine/)

- - plugs for dart iron eagle 215's angled heads (https://www.thirdgen.org/forums/tech-general-engine/423375-plugs-dart-iron-eagle.html)

91_B4C_RS

05-15-2007 05:54 PM

plugs for dart iron eagle 215's angled heads

i need help picing a plug for my engine... i just recently did a cam swap (solid roller, .606/.606 256/262 @.050 110 lsa)

my engine is a 383, dart iron eagle 215cc heads with angle plugs tapered seat, 64 cc chambers with flat top pistons roughly 10.5:1 compression.
vic jr intake, 850 cfm carb with headman longtubes

which plugs would u guys use?

whats a good heat range?

right now i am running a ngk R5673-7 do u think these are 2 hot or cold... or ok???

thanks

91_B4C_RS

05-16-2007 05:39 PM

Re: plugs for dart iron eagle 215's angled heads

anyone???

midias

05-04-2012 11:38 AM

Re: plugs for dart iron eagle 215's angled heads

NECROPOST SORRY

All times are GMT -5. The time now is 06:59 AM.