plugs for dart iron eagle 215's angled heads
05-15-2007, 05:54 PM
#1
Member
Thread Starter
Join Date: Jul 2005
Location: Indianapolis,IN
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 B4C Camaro RS
Engine: 370 lsx ls3 heads victor jr w/carb
Transmission: TH400 w/brake coan 8"4500-4800 stal
Axle/Gears: Moser 9" locker w/ 4.11's
plugs for dart iron eagle 215's angled heads
i need help picing a plug for my engine... i just recently did a cam swap (solid roller, .606/.606 256/262 @.050 110 lsa)
my engine is a 383, dart iron eagle 215cc heads with angle plugs tapered seat, 64 cc chambers with flat top pistons roughly 10.5:1 compression.
vic jr intake, 850 cfm carb with headman longtubes
which plugs would u guys use?
whats a good heat range?
right now i am running a ngk R5673-7 do u think these are 2 hot or cold... or ok???
thanks
my engine is a 383, dart iron eagle 215cc heads with angle plugs tapered seat, 64 cc chambers with flat top pistons roughly 10.5:1 compression.
vic jr intake, 850 cfm carb with headman longtubes
which plugs would u guys use?
whats a good heat range?
right now i am running a ngk R5673-7 do u think these are 2 hot or cold... or ok???
thanks
05-16-2007, 05:39 PM
#2
Member
Thread Starter
Join Date: Jul 2005
Location: Indianapolis,IN
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 B4C Camaro RS
Engine: 370 lsx ls3 heads victor jr w/carb
Transmission: TH400 w/brake coan 8"4500-4800 stal
Axle/Gears: Moser 9" locker w/ 4.11's
Re: plugs for dart iron eagle 215's angled heads
anyone???
05-04-2012, 11:38 AM
#3
Supreme Member
Re: plugs for dart iron eagle 215's angled heads
NECROPOST SORRY
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
evilstuie
Exhaust
24
02-28-2016 03:33 PM
