Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Tech / General Engine (https://www.thirdgen.org/forums/tech-general-engine/)
-   -   $200 for block and $200 for heads, both used with 70K from a 2002. Good deal? (https://www.thirdgen.org/forums/tech-general-engine/453068-200-block-200-heads.html)

dennisbernal91z 12-20-2007 10:58 AM

$200 for block and $200 for heads, both used with 70K from a 2002. Good deal?
 
I found a deal like this and want to know if it is good. I want to build a turbo motor out of an LS1. I can get the block for $200. It has crap internals but the block only has 70K miles. It will be getting built from the ground up anyways, so that doesn't matter.

Should I even bother getting the heads? They are selling for about the same. I will be running a couple turbos. I want to make about 600 to the wheels. That is the goal. Are the stock heads crap for this kind of application? Thanks

I may be able to talk him down on all the prices but I don't know. The motor was listed at $250 last week and it is now at $200. Please fill me in. Thanks.

-Dennis

five7kid 12-20-2007 11:50 AM

This is the same question as on the Engine Swap forum, right?

ibmtech 12-20-2007 12:37 PM

$200 for block and $200 for heads, both used with 70K from a 2002. Good deal?
 
The price for the block is great. Who cares if you have to tear it down if you are saving that kind of money. I wouldn't use the heads though unless they get a full rework. Even then, I don't think you will get the power you are looking for out of them.. They just won't flow good enough numbers for you.If you are running turbo's you would really want something better as far as the heads. You might want to think about running a Main Cap Girdle. I have found that it is a nice compliment for larger HP engines.

dennisbernal91z 12-20-2007 12:59 PM

Re: $200 for block and $200 for heads, both used with 70K from a 2002. Good deal?
 
Sounds great. I will pick up the block and leave the heads. Then I will start prowling the net for used aftermarket heads.
Thanks for the advice.

xpndbl3 12-21-2007 11:53 AM

Re: $200 for block and $200 for heads, both used with 70K from a 2002. Good deal?
 
factory ls1 heads outflow anything GM ever made and several aftermarket old school 23 heads. hop onto ls1tech and poke around in their forced induction board.

89RsPower! 12-22-2007 06:37 PM

Re: $200 for block and $200 for heads, both used with 70K from a 2002. Good deal?
 
you found an ls1 for $200 and you're wondering if its a good deal?

LMSkyliner 12-22-2007 07:21 PM

Re: $200 for block and $200 for heads, both used with 70K from a 2002. Good deal?
 

Originally Posted by 89RsPower! (Post 3573825)
you found an ls1 for $200 and you're wondering if its a good deal?

that was pretty much my first thought:lmao:

go for it! :)

89RsPower! 12-22-2007 09:02 PM

Re: $200 for block and $200 for heads, both used with 70K from a 2002. Good deal?
 
Yeah... does he have anymore? I'll take 5...

ibmtech 12-23-2007 05:24 PM

Re: $200 for block and $200 for heads, both used with 70K from a 2002. Good deal?
 

Originally Posted by xpndbl3 (Post 3572545)
factory ls1 heads outflow anything GM ever made and several aftermarket old school 23 heads. hop onto ls1tech and poke around in their forced induction board.

I had a set of LS1 heads and grant it they are good heads. I don't think it would be the best combination for usage with a turbo.

Other than that, If I found them, I would buy them and resale them and make some good cash


All times are GMT -5. The time now is 03:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands