Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Tech / General Engine (https://www.thirdgen.org/forums/tech-general-engine/)
-   -   Identify that wire (https://www.thirdgen.org/forums/tech-general-engine/527052-identify-wire.html)

inittab 05-22-2009 03:32 AM

Identify that wire
 
Anybody know what this is? Its down by the starter on my 350 TBI. I've looked around and dont really see anywhere for it to connect.
http://www.initips.com/~inittab/cama...21-09_1456.jpg

BluFBdy 05-22-2009 04:21 AM

Re: Identify that wire
 

Originally Posted by inittab (Post 4165994)
Anybody know what this is? Its down by the starter on my 350 TBI. I've looked around and dont really see anywhere for it to connect.
http://www.initips.com/%7Einittab/ca...21-09_1456.jpg

that pigtail goes to the fan switch located in the passenger side head, the knock sensor uses the same style connector but from the angle of this pic thatd be impossible not to see plus youll be throwing codes like crazy

Look from the same angle up on the head youll see the sensor, itll be on the head between two of the spark plugs on the rear half of the head

Good Luck

inittab 05-22-2009 09:30 PM

Re: Identify that wire
 
hrm seen absolutely nothing between the spark plugs. I will look again tomorrow and try to get a pic.

rgarcia63 05-23-2009 05:34 AM

Re: Identify that wire
 

Originally Posted by inittab (Post 4166779)
hrm seen absolutely nothing between the spark plugs. I will look again tomorrow and try to get a pic.

In between #4 & #8 below spark plugs and just above the starter.
There are 2 connectors on the passenger side with that type of connector; Fan temp switch, and Knock Sensor. KS is center of block just above the oil pan rail.

inittab 06-02-2009 12:19 AM

Re: Identify that wire
 
finally got it back up on jack stands and took a long again. I still cant find anything else on that side. here's a pic showing the one connector I did find:
http://www.initips.com/~inittab/camaro/HPIM0144.JPG

thats the knock sensor right?


All times are GMT -5. The time now is 01:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands