Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Tech / General Engine (https://www.thirdgen.org/forums/tech-general-engine/)
-   -   Where can I get a breather grommet? (https://www.thirdgen.org/forums/tech-general-engine/692439-where-can-i-get.html)

FreeSpirit 11-17-2013 01:59 AM

Where can I get a breather grommet?
 
My breather hose is pretty loose at the valve cover. There's a lot of play in any direction (all 360 degrees). I've read that you can't just use a PCV valve grommet for it, even though the hole sizes are the same. So where can I get just a breather grommet for the passenger side valve cover? Besides a junkyard.

Also, a long time ago, I misplaced the metal clip that holds the breather element/filter to the air cleaner assembly. Does that matter much? The breather element/filter is so cheap, and it comes with a metal clip too. I might just buy a new one.

Tuned Performance 11-17-2013 02:16 AM

Re: Where can I get a breather grommet?
 
Gm 19110486 the breather retin can be found in the prts store help section.

FreeSpirit 11-17-2013 02:40 AM

Re: Where can I get a breather grommet?
 
I thought you couldn't use a PCV valve grommet in place of a breather grommet?

Tuned Performance 11-17-2013 02:51 AM

Re: Where can I get a breather grommet?
 
I was providing the part number for a new pcv grommet, if you want the gm pn for the desired grommet if it is still available look it up at nalley. If doesn't matter if you don't have a grommet on your crankcase ventilation hose. yeh it will allow more hot air to enter into the air filter housing but unless your restoring this aspect who cares.
http://parts.nalleygmc.com/cars/Chev...car-parts.html

fervernt 11-17-2013 07:40 AM

Re: Where can I get a breather grommet?
 
I know ive bought grommets from auto zone for dirt cheap that work fine.

Restrorob 11-17-2013 09:25 AM

Re: Where can I get a breather grommet?
 

Originally Posted by FreeSpirit (Post 5668368)
I've read that you can't just use a PCV valve grommet for it, even though the hole sizes are the same.


I promise you, A rubber grommet doesn't know if there's a pipe or a PCV valve poked into it...... ;)

FreeSpirit 11-17-2013 03:29 PM

Re: Where can I get a breather grommet?
 
Well after replacing the PCV valve grommet, I see what you guys are saying. Its so tight it doesnt even matter.

I got the metal clip with the new breather filter. Can anyone tell me which way it goes on? I dont remember because its been about a year since I took it off. It seems like it should be in between the filter and air cleaner, with the C opening facing down. But there are also metal marks that seem to indicate the old one was on the outside of the air cleaner in between the hose and cleaner, with the C opening facing up. I couldnt get either way to snap closed though.

mjdavis68 11-17-2013 03:47 PM

Re: Where can I get a breather grommet?
 

Originally Posted by Tuned Performance (Post 5668371)
Gm 19110486 the breather retin can be found in the prts store help section.

T=Yes the "HELP" section at AZ or Oriellys


All times are GMT -5. The time now is 06:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands