Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Tech / General Engine (https://www.thirdgen.org/forums/tech-general-engine/)
-   -   L98 with vortec heads question (https://www.thirdgen.org/forums/tech-general-engine/741182-l98-vortec-heads-question.html)

Howster27 02-22-2017 07:02 PM
L98 with vortec heads question
 
I have a 91 l98 I want to install a mini ram and vortec heads. Can I use stock lifters,push tubes and rockers from the l98? If not what needs to be changed to install vortec heads?

Orr89RocZ 02-22-2017 07:12 PM
Re: L98 with vortec heads question
 
Should beable to but should measure pushrods to be sure of length. If using a different cam then definitely measure pushrods

Howster27 02-22-2017 07:15 PM
Re: L98 with vortec heads question
 
Will be using l98 stock cam

midias 02-23-2017 08:29 AM
Re: L98 with vortec heads question
 
Are the stock rockers self aligning? Vortecs need those

Orr89RocZ 02-23-2017 08:45 AM
Re: L98 with vortec heads question
 
Yes

Howster27 02-23-2017 05:03 PM
Re: L98 with vortec heads question
 
Thanks guys.


All times are GMT -5. The time now is 05:28 AM.


© 2024 MH Sub I, LLC dba Internet Brands