|
Vacuum pump help Trying to get in contact with Formula1LE but website still doesn’t allow me to message him can anybody help me out here I’m Trying to contact him about a bracket he made a few years back for a one belt serpentine system https://cimg5.ibsrv.net/gimg/www.thi...d976187ff5.png |
Re: Vacuum pump help I sent a pm for you. |
Re: Vacuum pump help
Originally Posted by NoEmissions84TA
(Post 6384824)
I sent a pm for you. |
Re: Vacuum pump help Hey guys...sorry but I don’t offer those anymore. The kit was modified to use a Gilmer crankshaft adapter to reduce the RPM of the pumps down to about 6:1 as per Morosos suggestion. It worked out very well but the CNC T6061 aluminum brackets for the Moroso VPs were not cheap and it was initially designed for a few high end race setups for guys wanting to keep a GM serpentine setup. I only got a few calls a year on them (very few guys want to run vacuum pumps I guess lol) so it just wasn’t worth the $$ to have more made. |
Re: Vacuum pump help
Originally Posted by formula1LE
(Post 6388469)
Hey guys...sorry but I don’t offer those anymore. The kit was modified to use a Gilmer crankshaft adapter to reduce the RPM of the pumps down to about 6:1 as per Morosos suggestion. It worked out very well but the CNC T6061 aluminum brackets for the Moroso VPs were not cheap and it was initially designed for a few high end race setups for guys wanting to keep a GM serpentine setup. I only got a few calls a year on them (very few guys want to run vacuum pumps I guess lol) so it just wasn’t worth the $$ to have more made. |
| All times are GMT -5. The time now is 08:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands