Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   TPI (https://www.thirdgen.org/forums/tpi/)
-   -   Racetronix fuel pump kit (https://www.thirdgen.org/forums/tpi/688932-racetronix-fuel-pump-kit.html)

KyleP 09-13-2013 09:56 PM

Racetronix fuel pump kit
 
1 Attachment(s)
I am trying to get my fuel pump kit installed and unfortunately I didn't recieve any instructions. Do any of you guys know how the bulkhead conector goes.

KyleP 09-13-2013 10:15 PM

Re: Racetronix fuel pump kit
 
1 Attachment(s)
Here is another pic

Tuned Performance 09-13-2013 11:02 PM

Re: Racetronix fuel pump kit
 
I'm not sure if your asking what wire goes to what side of the factory tank harness. But the red hot lead log your pump goes to the grey wire and black to black.

KyleP 09-14-2013 08:15 AM

Re: Racetronix fuel pump kit
 
Thanks for the help man. Any idea how the bulkhead connector goes. Does it replace the factory harness on the sender?

Tuned Performance 09-14-2013 08:31 AM

Re: Racetronix fuel pump kit
 
racetronics has a forum you can sign up for free with proof of purchase. the kit says plug and play. this may be a generic picture, but the ecm needs to control the relay I assume the harness is ran on the sub frame to the old fuel pump relay connecter.
http://www.racetronix.biz/mmWEBSTORE/Images/FL98.jpg
http://www.racetronix.biz/itemdesc.a...%2D005&eq=&Tp=

KyleP 09-15-2013 01:25 PM

Re: Racetronix fuel pump kit
 
The kit comes with wires that replace those going from the bulkhead to the pump. What is the best way to ground that wire?

TTOP350 09-15-2013 03:02 PM

Re: Racetronix fuel pump kit
 

Originally Posted by KyleP (Post 5637425)
The kit comes with wires that replace those going from the bulkhead to the pump. What is the best way to ground that wire?

Post a pic and part numbers of what your replacing.

You could also E-mail them for the instructions. I thought they used to have them on the site??

KyleP 09-15-2013 07:33 PM

Re: Racetronix fuel pump kit
 
1 Attachment(s)
It is http://www.racetronix.biz/mmWEBSTORE...s/BCWAFL98.jpg

TTOP350 09-15-2013 08:10 PM

Re: Racetronix fuel pump kit
 
Fairly certain your going to have to cut the ground wires to remove the old sending unit harness.
When you do, leave plenty of wire on the existing ground to splice your new connector back onto.

KyleP 06-08-2014 08:12 AM

Re: Racetronix fuel pump kit
 
I've got everything going I just can't get my gauge to work. I am hoping its a ground. I have bought a new sending unit the original was very rusty. I am guessing it must be a ground. The kit comes with a band clamp that you put around one of the fuel lines on the sending unit to ground it. I have read about a ground at the back seat but I don't see it. Have any of you ran into this?

AlpineWhiteIroc 02-04-2022 08:42 PM

Re: Racetronix fuel pump kit
 
so nobody has any clue how you're properly supposed to install the bulkhead connector harness ...?????
bunch of outdated threads that leave you with no answers


All times are GMT -5. The time now is 04:28 AM.


© 2024 MH Sub I, LLC dba Internet Brands