TPI Fuel Line O-Rings
 

Anybody out there have the part number for these O-Rings for the 5.0 TPI Fuel lines?

Thanks Bob

https://cimg3.ibsrv.net/gimg/www.thi...a862043a41.jpg

Re: TPI Fuel Line O-Rings
 

Oh, somewhere... http://austinthirdgen.org/parts/html/main1.htm should be able to look them up. Not sure the numbers will really be all that useful. Any place short of the dealership is just going to match em up by eyeball to the random assortment.

Re: TPI Fuel Line O-Rings
 

I found them Drew. Totally unnecessary thread.
https://cimg3.ibsrv.net/gimg/www.thi...8baaf31c6f.jpg

https://cimg4.ibsrv.net/gimg/www.thi...97ab9e08b4.jpg

https://cimg5.ibsrv.net/gimg/www.thi...503bdb777d.jpg

Re: TPI Fuel Line O-Rings
 

try
feed line 22514722
rtn line 22516256

Re: TPI Fuel Line O-Rings
 

:thumbsup:Glad you found replacements.You got them pretty fast,did you get them locally?

Re: TPI Fuel Line O-Rings
 

Hey Franny. Yes. I took those numbers and crossed then to AC Delco, which led me to Auto Zone. Last pack in Huntsville!!! Thank you!!!!

Re: TPI Fuel Line O-Rings
 

Pretty sure that's the kit for rebuilding the fuel rail. I suppose if the rings fit, wear them. Standard SK24 is another brand of the same set...

The brown Viton inlet/outlet O-rings are easy enough to find. Parts stores usually have an assortment on the pegs, or you can find them by digging around the websites. Hardest part is if you need more than a pair, since they can be hard to find in quantity.

Re: TPI Fuel Line O-Rings
 

It is Drew, complete set. Which work out since i have the whole fuel rail apart. Ready to assemble tomorrow.

Re: TPI Fuel Line O-Rings
 

Keep a copy of this handy, and you'll never NOT find an O-ring again:

https://www.parker.com/literature/OR...g_Handbook.pdf

Re: TPI Fuel Line O-Rings
 

for future reference, the o rings that go between the rubber line and the solid lines on the frame rail are "Dorman 800-013 Viton O Rings"

Re: TPI Fuel Line O-Rings
 

Thanks all.
I got them at Oriellys and Auto Zone. Bosch Injectors installed, all fuel rail O-Rings, 9th injector O-Ring included. 57K original injectors gone. Car runs super.

Re: TPI Fuel Line O-Rings
 

Thanks for that Vader. I also have the book from Parker

Re: TPI Fuel Line O-Rings
 

See the first link in this post:

https://www.thirdgen.org/forums/tpi/...ml#post5962508

I have three FI GM vehicles and it was worth my time/money to put together a kit full of necessary o-rings.