Replacing 700R4 with TH350 questions I am getting a TH350 built up to replace my bad 700R4 in my 86 Iroc. I got the TH350 with the 9" tail shaft. Will the front yoke on my current driveshaft fit the TH350 and will I have to lenghten or shorten my driveshaft? |
Yes it will fit. Yes you will probably have to lengthen or shorten your driveshaft. More likely, lengthen it. |
The driveshaft for a 9" tailshaft TH350 will be the same length as for a TH700. Mounting the tranny to the crossmember may be a different issue. |
Thanks for the quick replies guys. I am glad to hear the driveshaft will fit and be the right length. I should be able to work around the crossmember mount point alright. The TH350 and 3500 stall should be ready in a week and then I will take my car to the shop for the swap. I am trying to get all my ducks in a row before the car goes in. Thanks again |
How are you handling the torque arm mount? |
I ordered the B&M TH350 swap kit. It should be here by Friday. I have read others have used this kit and it worked out alright. |
All times are GMT -5. The time now is 05:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands