th350 + 3.42rear ? Just wondering if this is a bad setup. The rear is already in and i can get a th-350 for $150. THe guy with the tranny said id hear it whine, but i heard from a guy that was running 4.10 and it was fine. Also can i change the the 700r4 cross member or do i need to get a th350 bracket. If someone has one cheap and is willing to ship let me know. thanks guys and let me know asap. |
ratio has nothng to do with what you hear, or don't hear. as for it being a good combination a little depends on the engine, but you never mentioned having an engine. look at the b&m kit. i use to know the pn, 30029 might be it. |
I was using a th700 with 4.10 with 27"tires it was fine like 2300rpm at 65MPH. Then i swap to a th350 still hade th 4.10 it was ugly 3500 at 60mph so i switch to a 3.42 its now pretty fine for me 3000 at 67 mph.I like the th350 close ratio is very good for the 1/4 mile... in my advice bether than the th700 but got no overdrive its a good for a bad... :rolleyes: |
th350 :iagree: with smok, i just put a th350 in one of my thirdgens with a 4.10 gear, it rocks the eighth mile hard, but 3500 rpms down the highway gets old fast. not to mention it kills the gas mileage. but it does make it a blast to drive in town. |
it really depends on how much you drive on the highway |
All times are GMT -5. The time now is 10:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands