Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Transmissions and Drivetrain (https://www.thirdgen.org/forums/transmissions-drivetrain/)

- - 153 tooth or 168? (https://www.thirdgen.org/forums/transmissions-drivetrain/654134-153-tooth-168-a.html)

iinversion

06-12-2012 06:34 PM

153 tooth or 168?

I am getting a new flywheel with my clutch since the clutch is about shot, and I'm not entirely sure which toothed flywheel to get? There seems to be 153 toothed and 168 toothed both of which claim 'oem'. I have a stock oem starter.

//<86TA>\\

06-12-2012 06:41 PM

Re: 153 tooth or 168?

the flywheel is 153. the flex plate may be 168

iinversion

06-12-2012 06:45 PM

Re: 153 tooth or 168?

Thanks.

Apeiron

06-13-2012 09:00 AM

Re: 153 tooth or 168?

With a stock thirdgen starter the flexplate is 153 too.

dabomb6608

06-13-2012 12:01 PM

Re: 153 tooth or 168?

If its the T5 transmission then a 168 tooth won't even fit the bell housing. I went through that mess when I was installing my 400.

All times are GMT -5. The time now is 03:16 PM.