Bellhousing Question Hey guys, I put a tremec 5 speed in my 85 IROC. Unlike the stock transmission, this transmission sits level in the car. Does anybody know what kind of bellhousing I can use that will keep my stock fork and slave cylinder but will change the bolt pattern for the transmission from the angle pattern to the level pattern? I was thinking something like a c4 corvette bellhousing but I think they may have different slave cylinder mounting brackets... Thanks! |
Re: Bellhousing Question They do have different brackets so it would be a try & see how it goes. A Lakewood 15020 is dual-pattern and would work. Other ideas here in the bellhousing page: http://www.garage-scene.com/t5-into-ag-body/ |
Re: Bellhousing Question Wouldn't be too hard to fab up a bracket that would bolt to the trans bolts or the like. |
Re: Bellhousing Question Although the ballstud location for the fork pivot is different in the 84-92 F bellhousing than it is for the 84-88 Vette so bolting the F slave up isn't an immediate solution. Master to slave volume ratio needs changed. |
Re: Bellhousing Question
Originally Posted by jmd
(Post 5721308)
They do have different brackets so it would be a try & see how it goes. A Lakewood 15020 is dual-pattern and would work. Other ideas here in the bellhousing page: http://www.garage-scene.com/t5-into-ag-body/ Fabricating one wouldnt be hard but its magnesium and a 50 dollar bellhousing from a junk would be much easier. Anyone know of ANY bellhousing that will work for this application? Thanks! |
Re: Bellhousing Question but its magnesium |
Re: Bellhousing Question
Originally Posted by sofakingdom
(Post 5721491)
Doesn't matter; you can make a bracket out of anything convenient, and bolt it to anything convenient that can hold it. Personally I usually use steel for such things. Trans bolts & BH bolts are right there for you. |
Re: Bellhousing Question Ballstud location change means the fork is different. Are you saying the 84-88 vette bell is mag? Didn't know that. |
Re: Bellhousing Question
Originally Posted by jmd
(Post 5721618)
Ballstud location change means the fork is different. Are you saying the 84-88 vette bell is mag? Didn't know that. I think im gunna try to pick up a bellhousing for cheap and see if I can modify a bracket to work with my stock slave... Thanks! |
All times are GMT -5. The time now is 08:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands