Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Transmissions and Drivetrain (https://www.thirdgen.org/forums/transmissions-drivetrain/)
-   -   Where to get the correct VSS for a WC T5 ??? (https://www.thirdgen.org/forums/transmissions-drivetrain/716301-where-get-correct-vss.html)

greenyone 03-14-2015 11:32 AM

Where to get the correct VSS for a WC T5 ???
 
I'm confused. My 91 T5 has a VSS that looks like this:

https://cimg2.ibsrv.net/gimg/www.thi...1a03d283df.jpg

The only ones I see in the parts stores and online for my year look like this. Which is clearly not going to work. Any help fellas?


https://cimg6.ibsrv.net/gimg/www.thi...aa787d7681.jpg

Dyno Don 03-14-2015 06:25 PM

Re: Where to get the correct VSS for a WC T5 ???
 
The bottom one is for an auto

I might have the one you need, i'll check, they are really rare.

greenyone 03-15-2015 11:49 AM

Re: Where to get the correct VSS for a WC T5 ???
 
Thanks Don. Lemme know. I see a couple vendors out there have some old stock ones that float around $175-$225. That's a little steep though.

greenyone 03-15-2015 11:51 AM

Re: Where to get the correct VSS for a WC T5 ???
 
On the same subject. My speedo and tach are working fine but the car is throwing the VSS code every time I drive it. It also smells like it's running a bit rich. Does the VSS work along side the other sensors that adjust fuel/air?

greenyone 03-21-2015 02:39 PM

Re: Where to get the correct VSS for a WC T5 ???
 
Well I found a replacement (used) and I'm still throwing the code 24. Is there a test procedure that anyone knows about or should I just assume that my ECM/ECU is the problem since it's a 91 T5 Speed Density car???

Kevin91Z 03-22-2015 12:26 PM

Re: Where to get the correct VSS for a WC T5 ???
 
I'm guessing the speedometer on the dash works?

You'll need to hook up a scan tool and see if the ECM is seeing the correct speed as well.

greenyone 03-22-2015 12:33 PM

Re: Where to get the correct VSS for a WC T5 ???
 

Originally Posted by Kevin91Z (Post 5893610)
I'm guessing the speedometer on the dash works?

You'll need to hook up a scan tool and see if the ECM is seeing the correct speed as well.

Speedo works. It even seems accurate when compared to my GPS. Like I mentioned earlier. I've tried two VSS sensors and they both produce the same result (code 24). What scan tool would you recommend?

greenyone 03-22-2015 12:55 PM

Re: Where to get the correct VSS for a WC T5 ???
 
I'd also add that I had my prom flashed to tune out the EGR and AIR components. I mailed it out to harris performance and he did the tune based on my car. I just had the engine rebuilt prior to this, so I really can't pinpoint if it happened after the new prom tune. I just knew that when I had it all apart that I didnt want to bother with all of the emissions crap when putting it all back together. It it possible that could have something to do with my code 24?

greenyone 03-22-2015 01:08 PM

Re: Where to get the correct VSS for a WC T5 ???
 
Another thought. Does anybody know which/what color wires at the ecm are for the VSS. I was thinking I could bypass the harness and splice/wire the VSS directly into the ECM to rule out a short. Just do that and take a drive with the wire(s) run from under the car through the drivers door and into the ECM. Thoughts?

southbaysd 06-02-2015 09:06 PM

Re: Where to get the correct VSS for a WC T5 ???
 

Originally Posted by Dyno Don (Post 5890236)
The bottom one is for an auto

I might have the one you need, i'll check, they are really rare.

Do you still have one? I am trying to locate one :)

Thanks


All times are GMT -5. The time now is 02:56 PM.


© 2024 MH Sub I, LLC dba Internet Brands