3.4 Swap Going tomorrow to pick up a 3.4 from a 1995 Camaro has 90,000 miles on it. Guy saids it needs headgasket. Getting alot of free stuff with it (NO INJECTORS) DOes anyone know what other kind of cars have the 17 lb injectors. Been reading the threads on the swaps Its going in my 91 camaro. Will keep you updated on the swap. Going to replace the Headgaskets. Timing chain Freeze plugs Oil pan gasket Water pump Rear main seal |
Re: 3.4 Swap Do you need to replace the injectors? Are you looking for factory ones? The fuel injectors are 18.4 lb/hr, same as the pre-00 3100s. |
Re: 3.4 Swap thanks. He did not have the injectors with the engine. Got the complete engine with intake and everything for 50.00 |
Re: 3.4 Swap :eek: $50? Man, if I could find a 3.4 for that price, I'd carry it home on my BACK if I had to (no truck :doh: ). Well, okay, I almost had the whole 3100 I got the head parts off of for $50, but there was no way to get it home (not like the engine was going to sit in my back seat all nice, right?) You got lucky there. Just make sure it spins freely. |
Re: 3.4 Swap Turns freely checked it before I brought it. Pulled all the 3.4 stuff off of it and set it ona tire. |
Re: 3.4 Swap Well, as long as it's out, you could go ahead and throw some 3400 heads and intake on it and call it a day. ;) It's already set up for the DIS, so it would make things a lot easier. :edit: Oh, and when you do the RMS, it might be a good idea to replace the seal on either the dizzy or the oil pump drive (depending on which way you go with the swap) and either RTV seal or replace the gasket on the rear cam plate as well. BTW, you can get the MEMCAL from a 93 3.4 (non-SFI, still has a MEMCAL and uses the 16149396 ECM, same as the 92-93 3400 DOHC) and run the DIS if you're up to it, so you don't have to screw with the dizzy. |
Re: 3.4 Swap Have some 3.1 heads I had redone last year. Going to use them Order timing chain Gaskets set timing cover / Head gasket set Rear main seals and oil pan gasket. OOPS forgot freeze plugs Going to the dealer for the cam seal. |
Re: 3.4 Swap got some injectors at the yard this weekend |
Re: 3.4 Swap Everyhthing is done and the motor is installed. I am prety sure the distributor is 180 out. Cranks but wont run. Will look at it tomorrow. |
Re: 3.4 Swap hey i have a 1991 camaro its a 3.1 im looking to put in a 3.4 v6. you dont need to change anything? |
All times are GMT -5. The time now is 05:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands