Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   V6 (https://www.thirdgen.org/forums/v6/)
-   -   black spark v6 3.1 (https://www.thirdgen.org/forums/v6/625151-black-spark-v6-3-a.html)

Reni-Camaro 08-20-2011 01:29 PM

black spark v6 3.1
 
no check engine!
New oxigen sensor!

:help: :help: :help:

84CAMARO28inFL 08-21-2011 09:14 PM

Re: black spark v6 3.1
 
Id love to offer advice, but i do not know what "black spark" is.

Does the car run?

Reni-Camaro 08-22-2011 02:38 PM

Re: black spark v6 3.1
 
Sorry my english!

Spark Plug black, I think it is a rich exhaust


Originally Posted by 84CAMARO28inFL (Post 5016650)
Id love to offer advice, but i do not know what "black spark" is.

Does the car run?

yes, but very bad :confused:

firebird904 08-23-2011 02:34 PM

Re: black spark v6 3.1
 
When's the last time the car's had a tune up?

Reni-Camaro 08-23-2011 03:37 PM

Re: black spark v6 3.1
 
i bay engine 3.1 for swap my car!
6-12 m.

Project 3.4 Camaro 08-23-2011 03:47 PM

Re: black spark v6 3.1
 
Is the black stuff sooty(like powdery kind of, particles fall off if you touch or rub it) or is it oily/greasy? The former means you are running rich(typical of these engines) the latter indicates bad valve stem seals or piston rings.

84CAMARO28inFL 08-23-2011 03:57 PM

Re: black spark v6 3.1
 

Originally Posted by Project 3.4 Camaro (Post 5018442)
Is the black stuff sooty(like powdery kind of, particles fall off if you touch or rub it) or is it oily/greasy? The former means you are running rich(typical of these engines) the latter indicates bad valve stem seals or piston rings.

There was a fair amount of oily slime around my spark plug holes, but my carb is out of adjustment and i know that.. could that make more "running rich?" And they call that "soot," right? Ive done iston soaks on my engine with carb and choke cleaner, sprayed in to the spark plug holes. Smoked for a bit, then when that cleared up, nice and smooth-running.

OP, does it consistently blacken up the plugs?

Reni-Camaro 08-24-2011 03:35 AM

Re: black spark v6 3.1
 
Yes ''soot''!

how to test the MAP???

I guess it could be a temperature sensor?

ex-x-fire 08-24-2011 06:30 AM

Re: black spark v6 3.1
 
Test fuel pressure & leak down rate.
Put a tee into the vacuum hose that goes to the map sensor, hook up a vacuum gauge. It should be above 16.5" at idle, with a smooth needle sweep. Have the engine scanned for live data.
You can test the coolant temp sensor, you need an ohm meter, thermometer, & a pan of water (heat it up slowly to 220 degrees), note the ohms at different temps. Google GM Coolant Temp Sensor Values for the ohm/ temp readings.

firebird904 08-24-2011 08:54 AM

Re: black spark v6 3.1
 
Reni-Camaro, if you need the coolant temp sensor values you can pm me and I'll send you an attachment with the chart.


All times are GMT -5. The time now is 05:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands