Fasteddis Turbo 3.1/3100 Hybrid Hey guys I havent really been posting my builds on here latly. But I made up this video as a year in review. I will say im very excited to see what the car is capible of in a few short months. April 6th marks the first chance I have at taking the car down the strip, and still there is alot to be done still. Thanks again turbo and tuning friends for all the help over the last year. A year ago I didnt know anything about what I am doing today. Without you here on TGO I would have been lost in a sea of V8's:eek: Enjoy. Sorry if you dont like the music...:) http://www.youtube.com/watch?v=WGqVh...ature=youtu.be |
re: Fasteddis Turbo 3.1/3100 Hybrid love the KSE tune lol |
re: Fasteddis Turbo 3.1/3100 Hybrid i bet u will see some 11's this year depending on what happenes with the whole trans deal |
re: Fasteddis Turbo 3.1/3100 Hybrid You are using Code 59 right ? How is it working out for ya ? |
re: Fasteddis Turbo 3.1/3100 Hybrid
Originally Posted by mars061
(Post 5461864)
You are using Code 59 right ? How is it working out for ya ? Yea code59. I like it for the most part. The resolustion is a little tight. But else then that no real issues here. |
re: Fasteddis Turbo 3.1/3100 Hybrid Fasteddi what part of Ohio are you in? I'm in Streetsboro up by Kent State. I can't see the vid here at work so will have to check it out at home. |
re: Fasteddis Turbo 3.1/3100 Hybrid
Originally Posted by 2007xl50
(Post 5462200)
Fasteddi what part of Ohio are you in? I'm in Streetsboro up by Kent State. I can't see the vid here at work so will have to check it out at home. |
re: Fasteddis Turbo 3.1/3100 Hybrid hmmm.... lots of OH folks seems to be here. its a little trip from S'boro to Toledo lol :totopic: |
re: Fasteddis Turbo 3.1/3100 Hybrid Good point! Well I know this much if I dont run somesort of 12's in the first few races my car will not like me for the beating i give it!!! :gocrazy: J/K |
re: Fasteddis Turbo 3.1/3100 Hybrid
Originally Posted by fasteddi
(Post 5463205)
Good point! Well I know this much if I dont run somesort of 12's in the first few races my car will not like me for the beating i give it!!! :gocrazy: J/K |
re: Fasteddis Turbo 3.1/3100 Hybrid i forgot to add dont be surprised if it dont run good at first with all the changes u made when my new 3.1 went in and i made all the different changes my first outing went 15.0 14.8 then 14.5 - 14.00 and the third time it went 13.5 and 13.0 4th it went 12.75 and 12.30's etc etc the only thing i ever did was change the tune on it just cause the car feels good dont mean it will run good , when the car went 15's it ran and drove great but track times told the story |
re: Fasteddis Turbo 3.1/3100 Hybrid heres the 14.5 run listen to the car on the first burnout didnt bother putting the run it cause car had issues going down track , then the second burnout is on the 14.5 , the third was the burnout for the 14.01 but i didnt add the video for some reason no boost chnages just some tunning all done with the stock narrow band i didnt have a wideband in the car for about 4 years i started tunning with a narrow band went 12'switht he 2.8 then built the 3.1 and didnt put a wideband in it till the car went 12's/13.0 |
re: Fasteddis Turbo 3.1/3100 Hybrid
Originally Posted by fasteddi
(Post 5462431)
Im over by Toledo now. I use to live in Bellevue(20 minuets from norwalk) Funny thing is I use to go to Akron U back in the day. So I lived there for awhile. Remember going over twards kent st all the time. |
re: Fasteddis Turbo 3.1/3100 Hybrid Walbridge, gumby |
re: Fasteddis Turbo 3.1/3100 Hybrid
Originally Posted by fasteddi
(Post 5463468)
Walbridge, gumby I drive by that way almost daily headin to the GFs out by the truck stops. |
re: Fasteddis Turbo 3.1/3100 Hybrid Youll have to shoot by sometime. |
re: Fasteddis Turbo 3.1/3100 Hybrid Where at, you get a house or in the trailer park? [my luck you would move in next to my GF ex hubby in the trailer park, he already lives caddy corner from an old friend] Spent allot of my life riding off road at the ponds behind the trailer park. back when it was more off road friendly. |
re: Fasteddis Turbo 3.1/3100 Hybrid Im at a house on 795. Hey fellas my DD died this morning so im frantically putting the camaro back together. Look at these brake pictures and tell me what im messing up as I have 2 things lift over and dont know where the e-brake cable hooks up. Thanks fellas. I need to have the car on the road by tuesday morning. Ps im looking to buy a 1999 grand am with a gtp engine swap from a friend for a DD. Cant beat that but i need a week still to get that so i have to drive the camaro 4 days to work....lol http://sphotos-b.xx.fbcdn.net/hphoto...61001850_n.jpg http://sphotos-a.xx.fbcdn.net/hphoto..._6573344_n.jpg http://sphotos-a.xx.fbcdn.net/hphoto...64277403_n.jpg Left over parts??? http://sphotos-a.xx.fbcdn.net/hphoto...34426640_n.jpg |
re: Fasteddis Turbo 3.1/3100 Hybrid themetal bar and spring go inbetween the 2 shoes u can see the notch for it on the one shoe right above the blue spring in this picture http://sphotos-a.xx.fbcdn.net/hphoto..._6573344_n.jpg |
re: Fasteddis Turbo 3.1/3100 Hybrid it also looks like u left the ebrake lever attached to the old shoes i dont see it installed, then again its hard to see on my phone |
re: Fasteddis Turbo 3.1/3100 Hybrid crap i didnt put it on(the ebrake) i forgot. Else then that do the springs look ok? where there all at? |
re: Fasteddis Turbo 3.1/3100 Hybrid springs look ok but its been a while since i had 7.5 brakes apart. the eebrake lever usually attaches at the bottom of the shoes, are they attached to the cables still or on ur old pads? |
re: Fasteddis Turbo 3.1/3100 Hybrid http://www.moserengineering.com/medi.../file_16_1.jpg iirc the ebrake lever goes on the backside of the shoe i.e closest to the backing plate |
re: Fasteddis Turbo 3.1/3100 Hybrid nm ebrak elever goes near the top of the shoe u need to disassemble them and redo it follow this http://www.pbase.com/nufsed/drumbrake |
re: Fasteddis Turbo 3.1/3100 Hybrid the cable is disattatched and the levers ive removed from the old pads. I gotta get right at it after work tommorow so i hope it goes well. Ive got a spare ride thanks to my GF tommorow but she and i both have to work on tuesday..wtf is up with my luck |
re: Fasteddis Turbo 3.1/3100 Hybrid just follow that link i posted and u will be fine, be sure to pay attention to the adjusters and make sure they are on the right side otherwise the brakes wont self adjust dont forget to adjust the brakes once u are done jack up under the rear and spin the tire by hand, tighten the adjuster till u feel a bit of drag then back it off till u have a slight drag on the wheel. repeat for the other side |
re: Fasteddis Turbo 3.1/3100 Hybrid I had no clue, I always look at the other side while doing brakes ;) |
re: Fasteddis Turbo 3.1/3100 Hybrid I have a gold and a silver adjuster? Why is that? there new ones |
re: Fasteddis Turbo 3.1/3100 Hybrid so u dont mix and match them , that link i posted explains how to make sure there on the right side if u mix them up instea dof self adjusting out as the brakes wear they will close up making the back brakes work even less |
re: Fasteddis Turbo 3.1/3100 Hybrid ok. How do i connect the new lines. I have 2 new short lines with the fittings(bubble flare) to screw into the brake cylinders. Now on the other side I have a cut brake line(the main line) and then the end of the short brake line I bought. Do i flare these ends and use a flared union to put them together??? something like this? http://www.oreillyauto.com/site/c/de...1164&ppt=C0248 to connect the brake lines together? I have compression fittings buy the hand full but to be honest, i dont trust them for that amount of pressure. |
re: Fasteddis Turbo 3.1/3100 Hybrid u can use the union as long as u can flare the tubing correctly ive used compression fittingds in a pinch before and they worked fine but i dont recomend it if u have the means to do it properly |
re: Fasteddis Turbo 3.1/3100 Hybrid do i have to double flare that line?Or can i single flare it? Im in a bind that if i dont get it going tonight then im screwed but i also want to be safe. |
re: Fasteddis Turbo 3.1/3100 Hybrid I had to use those double flares when doing my rear lines. |
re: Fasteddis Turbo 3.1/3100 Hybrid |
re: Fasteddis Turbo 3.1/3100 Hybrid im working the flares right now how do i change that video so you can see it? |
re: Fasteddis Turbo 3.1/3100 Hybrid Oh I dunno, just youtube pops up saying you have not set it up to allow view on mobile devices yet... if ya need any help im 1/2 a man today, was only 1/4 of one yesterday, to much fun time with the GF sat n my legs were so sore I could barley walk yesterday. |
re: Fasteddis Turbo 3.1/3100 Hybrid
Originally Posted by fasteddi
(Post 5462431)
Im over by Toledo now. I use to live in Bellevue(20 minuets from norwalk) Funny thing is I use to go to Akron U back in the day. So I lived there for awhile. Remember going over twards kent st all the time. Sorry to hear about your DD. |
re: Fasteddis Turbo 3.1/3100 Hybrid ok fellas got the car back together. Didnt replace the front rotors and pads like i wanted to because there due. But took it for a 10 min cruse. Its starts, it moves, and it stops. Just as it should. Posi is nice!! LOL I slammed on those brakes many times and no issues else then i wish we had a true abs. Ill update later its been 6hrs of working on this thing and its time for some food. |
re: Fasteddis Turbo 3.1/3100 Hybrid how do u like the new gears? lol i know u beat on it just a lil bit |
re: Fasteddis Turbo 3.1/3100 Hybrid Works good dave. The gears are definitly noticable let alone if i just floor it it just sits sidways... I didnt do that too much though. Im getting some KR from something. I think its just from the hvac cover plate i put on. I didnt have time to lay a gasket between the metal so it could and is probly rattleing. Its going with KR even when im just driving at 60 and gas it(no burnout). But else then that its good. It just has to get me 70 miles to work(round trip each day) for the rest of the week which im sure it will. Off hand how fast do you think 65mph is on my spedo now?? Like 75-80. I went from the 3.23 to the 3.73 |
re: Fasteddis Turbo 3.1/3100 Hybrid
Originally Posted by fasteddi
(Post 5464604)
Works good dave. The gears are definitly noticable let alone if i just floor it it just sits sidways... I didnt do that too much though. Im getting some KR from something. I think its just from the hvac cover plate i put on. I didnt have time to lay a gasket between the metal so it could and is probly rattleing. Its going with KR even when im just driving at 60 and gas it(no burnout). But else then that its good. It just has to get me 70 miles to work(round trip each day) for the rest of the week which im sure it will. Off hand how fast do you think 65mph is on my spedo now?? Like 75-80. I went from the 3.23 to the 3.73 im not sure actually since it will be off by percentages not a set number @ 10 mph it may be off 2% @ 50mph it can be off say 7% best bet is to fix it in the ecm so that ur datalogs give u accurate readings then find out what is 25/35/45/55 mph and mark them on ur speedo so u dont forget while driving btw u know u have to post a video now right lol |
re: Fasteddis Turbo 3.1/3100 Hybrid i didn't realize some of you were so close to me.... i'm about an hour west of toledo. anyways, you using the optical or magnetic VSS? |
re: Fasteddis Turbo 3.1/3100 Hybrid magnetic vss. There a buffer in the ecm but im not up to tuning right now. Been a long day on that car...lol But I will get into the speedo later this week. Dave no vids tonight. Ive been busting asss getting that car done and its cold out... too cold. Sure wish I had a heater in that car. Ill get some vids though man as soon as i can, you know that. Heres the car im going to hopefully pick up this weekend. Its a 98 GT with L67 swap. Green Sedan with stock hood and spoiler about 80k miles on the body. 40k since the rebuild on the motor and trans., Thrasher CAI, MPS on a gen3, SLP Loudmouth Exhaust, AC Delete, SLP front Swaybar I drove it before and its a nice ride. Makes high 13.90 sec passes with 10psi of boost. But its just a DD for me so no beating the helll out of it. Sure beats the buick lesabre DD I have now. I even get a tuner program and cable in case i need to retune it. http://sphotos-b.xx.fbcdn.net/hphoto..._2979375_n.jpg http://sphotos-b.xx.fbcdn.net/hphoto..._7463873_n.jpg |
re: Fasteddis Turbo 3.1/3100 Hybrid assuming no other changes went on, multiply your road speed constant by 1.155 and that will get it back to where it should be in the ECM. whether or not you can get the speedo accurate via the pulse divisors, i don't know. also, grand prix, not grand am. :) |
re: Fasteddis Turbo 3.1/3100 Hybrid nice man that car would be perfect with a 1-1.5 inch drop, polish the lil lip on the rims, and some smoked lights |
re: Fasteddis Turbo 3.1/3100 Hybrid damm i wrote grand am...lol wtf. Opps lmfao. |
re: Fasteddis Turbo 3.1/3100 Hybrid
Originally Posted by fasteddi
(Post 5464665)
Sure beats the buick lesabre DD I have now. |
re: Fasteddis Turbo 3.1/3100 Hybrid FWD I have a major problem. I go to start the car this morning. Letting it warm up and it just dies. Then i kill the battery trying to start it. Pull a plug and its soaked. SO i get home from work and go start it. Starts right up but is rich as crap. No alky on either(its diconected physically). I could make 10psi of boost from free reving it. Never getting above 12afr ever. Its rich and from what i see every last plug is black as can be. So its not just a single injector problem. Help please on how to eliminate issues. Also my injector duty cycle seemed quite high when i tried to let it idle(but you can tell its rich as it stutters) DC is arround 5% which is way more then it should be. Bad chip? Bad ECM? Bad regulator?? |
re: Fasteddis Turbo 3.1/3100 Hybrid I can tell you that often happend to mine when the battery has been undone for a while or its been sitting a while, had to use starting fluid a few times, but it went away once going. To bad on FWD, need to find a RWD Buick to put my engine and stuff from the Buick wagon, getting to rusty body wise for the GF and kids. Full frame makes it a tank cept the doors are about to rot off, giving it paper bag side impact rating..... |
re: Fasteddis Turbo 3.1/3100 Hybrid WEll now it started up fine. I did 3 things. I reset the ecm. I put a different chip in it, and also I noticed that if i blew into the vac reference for the regulator it was leaking air. But the leak was because the hose wasent on there good. Now the injec dc is 1.5% which still makes me think its the damm ecm but that just me. Ill sell ya my buick cheep....lol make it a RWD |
All times are GMT -5. The time now is 09:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands