aodhan ah02 18x8.5 18x9.5 35/30 I just ordered a set of aodhan ah02 wheels in 18x8.5 35mm and 18x9.5 30mm in 5x114.3. I plan on using a 1.25 adapter on the front and a 1 inch adapter on the rear, and i have a concern on the front spindle grease cap. Has anyone out there used a wheel of the same width and adapter on the front, with any issue of the grease cap not fitting under the center cap? Any help would be appreciated. |
Re: aodhan ah02 18x8.5 18x9.5 35/30 Ok, so I assume you know the bolt pattern is wrong and you need the spacers to alter that. Usually a spacer will allow the caps to clear, but it's hard to tell since every wheel/centercap is different. Worst case, kore3 and probably other people, makes a billet dust cap that look really good and can take the place of the center cap if it doesn't fit |
Re: aodhan ah02 18x8.5 18x9.5 35/30 Thanks for the help. As i said in my post i am planning on a 1.25 front and 1 inch rear adapter. I'm not sure the 1.25 and the wheel to cap space will be enough, thanks for the source of aftermarket caps. |
All times are GMT -5. The time now is 06:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands