[NJ] suspension goodies, all the good stuff you've always wanted

Thread Tools
 
Search this Thread
 
Old Nov 27, 2016 | 05:03 PM
  #1  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
suspension goodies, all the good stuff you've always wanted

Parting out my 92 project.
all parts have under 5k miles on them, parts are all in good shape but are used. I will clean them as best i can before shipping.

-UMI strut mounts, built 3/4" taller than their normal offering. $175 shipped
**may not clear the master cylinder without shimming the booster**


[/B]
-Modified 92 'x' heavy spindles, Kore3 billet 7071 hubs with long 1/2-20 screw in studs, billet dust cap, solid bearing spacers, steering relocation brackets. Steering brackets clear 18" wheels with as much backspacing as you can fit on the car, dont know about anything else, never ran a different setup. Hubs are 1le spec +.25". long aluminum tie rod adjuster sleeves and outer rod ends, bump stop adjustable $600 shipped.

might have more as i get parts off.

-I have a set of 4, 18x10.5 apex arc-8 wheels and 295-35 tires too, direct fit on the front with my hubs, rear needs a 10mm spacer. wheels are drilled to the proper bolt pattern and weight 19.5lbs each. ask if interested, wheels are $341 each new and tires were almost 300$ each. Make reasonable offer.



car in its glory




all shipping is included in the price, paypal or cash in person only. Shipping only to the lower 48. Can ship elsewhere, but buyer pays actual shipping.

any questions, message me here or if local text call
Phil
9082689201

Last edited by //<86TA>\\; Jan 17, 2017 at 07:53 PM.
Reply
Old Nov 27, 2016 | 07:03 PM
  #2  
blacksunshine'91's Avatar
Supreme Member
25 Year Member
iTrader: (10)
 
Joined: Sep 2000
Posts: 2,504
Likes: 195
From: Moorpark, CA
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: suspension goodies, all the good stuff you've always wanted

Are you parting out the whole car, or just specific parts?
Reply
Old Nov 27, 2016 | 07:30 PM
  #3  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Putting it mostly back to stock, then car will be sold as a whole.
Reply
Old Nov 28, 2016 | 02:07 PM
  #4  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Konis are sold...
Reply
Old Nov 29, 2016 | 12:01 PM
  #5  
Ed1LE's Avatar
Senior Member
25 Year Member
Liked
Loved
Community Favorite
iTrader: (39)
 
Joined: Feb 2001
Posts: 752
Likes: 19
From: Westminster, MD USA
Car: 91 Firebird 'vert, 91 Formula
Engine: 5.7, 5.0
Transmission: T56, T5
Axle/Gears: Auburn w/ 3.73's, 3.42
Re: suspension goodies, all the good stuff you've always wanted

Can you provide more info on these that are listed in the sale thread for the car:
-Adjustable upper wonder bar/steering box brace
-Adjustable lower chassis brace under firewall

Are these being sold as well or can you provide details about them? Thx!
Reply
Old Nov 29, 2016 | 01:25 PM
  #6  
dahuntin's Avatar
Junior Member
 
Joined: Apr 2016
Posts: 14
Likes: 0
From: Hampton Roads, VA
Car: 89 Camaro
Engine: 385
Transmission: '94 T-56
Axle/Gears: Broken 10 Bolt
Re: suspension goodies, all the good stuff you've always wanted

Could you tell us more about the first picture? It looks like you've fabricated a NASCAR style sway bar into a a Watts link that goes mounts where the normal panhard bar would go...
Reply
Old Nov 29, 2016 | 03:22 PM
  #7  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Originally Posted by Ed1LE
Can you provide more info on these that are listed in the sale thread for the car:
-Adjustable upper wonder bar/steering box brace
-Adjustable lower chassis brace under firewall

Are these being sold as well or can you provide details about them? Thx!
Both parts are prototypes and not for sale currently
Reply
Old Nov 29, 2016 | 03:24 PM
  #8  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Originally Posted by dahuntin
Could you tell us more about the first picture? It looks like you've fabricated a NASCAR style sway bar into a a Watts link that goes mounts where the normal panhard bar would go...
Pretty much yes. However its a mumford link not a watts link. There is a thread on here, I think in fab, where I started it. That's the 2nd version un the picture, the 3rd version is still on my bench.
Reply
Old Dec 2, 2016 | 05:45 PM
  #9  
Rezorector's Avatar
Junior Member
iTrader: (1)
 
Joined: Nov 2016
Posts: 3
Likes: 0
From: Charlotte NC
Car: 1988 Camaro IROC Z
Engine: 350 TPI
Transmission: 700r4
Re: suspension goodies, all the good stuff you've always wanted

The Koni yellows came in, they look great. Good seller!
Reply
Old Dec 2, 2016 | 10:12 PM
  #10  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Wonder bar sold

Last edited by //<86TA>\\; Dec 2, 2016 at 10:17 PM.
Reply
Old Dec 3, 2016 | 06:40 AM
  #11  
Steve Quinn's Avatar
Junior Member
iTrader: (2)
 
Joined: Aug 2014
Posts: 30
Likes: 1
From: Clawson, Michigan
Car: 1990 Camaro IROCZ
Engine: 305
Transmission: T5
Axle/Gears: 3.45
Re: suspension goodies, all the good stuff you've always wanted

What did you think of UMI rotojoint?
Reply
Old Dec 3, 2016 | 08:17 AM
  #12  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Originally Posted by Steve Quinn
What did you think of UMI rotojoint?
A very good functioning part. Quite, free moving and smooth.
Reply
Old Dec 5, 2016 | 07:06 PM
  #13  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Bump
Reply
Old Dec 6, 2016 | 06:44 PM
  #14  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Sway bar sold
Reply
Old Dec 12, 2016 | 06:26 AM
  #15  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Monday morning bump
Reply
Old Dec 15, 2016 | 06:44 AM
  #16  
Steve Quinn's Avatar
Junior Member
iTrader: (2)
 
Joined: Aug 2014
Posts: 30
Likes: 1
From: Clawson, Michigan
Car: 1990 Camaro IROCZ
Engine: 305
Transmission: T5
Axle/Gears: 3.45
Re: suspension goodies, all the good stuff you've always wanted

On the rotojoint rear control arms are they chrome moly, how heavy are they? Do they come with the spannner wrench?
Reply
Old Dec 15, 2016 | 02:14 PM
  #17  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

They are chromoloy and there is no spanner wrench to come with them. They don't come with one from UMI, but I believe they are available from them. They are still tight.

I can weight one when I get home, probably 2.5lbs each I would guess?
Reply
Old Dec 17, 2016 | 09:08 AM
  #18  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

Rear control arms sold!!!
Reply
Old Jan 1, 2017 | 11:26 AM
  #19  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

New years bump.

Strut mounts, a arms and spindles hubs are still available.
Reply
Old Jan 17, 2017 | 07:54 PM
  #20  
//<86TA>\\'s Avatar
Thread Starter
Supreme Member
15 Year Member
iTrader: (15)
 
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: suspension goodies, all the good stuff you've always wanted

A arms are sold
Reply
Old Jan 17, 2017 | 09:09 PM
  #21  
Ben Thomson's Avatar
Junior Member
 
Joined: Aug 2016
Posts: 9
Likes: 0
Car: 1992 Camaro RS 25th Anniversary
Engine: 305 TBI
Re: suspension goodies, all the good stuff you've always wanted

Interested in the hubs. Can you post pics? How much?
Reply




All times are GMT -5. The time now is 01:01 AM.