Hi guys,

I'm removing my passengerside front fender. I almost have everything out, except for the gfx where the fender meets the door.

I've included some photo's
It's the trim that runs from the front to the rearfender. The gfx has 2 bolt to the fender.
What do i need to use to get these guys out? 10mm? They look exactly like the 4 bolts that hold the bumper and fender together?

Any help appriciated!

 

You have to take the plastic inner fender liner out. Once that's out, its right there and easy to get to

 

Thanks steve

You mean this, right😁



Which tool do you use to get those 2 bolts out? 10mm socket? I'm having a bit of a hard time finding the right tool

Thanks

 

i believe i used a 7/16 to get mine off

 

Aha, that's an 11mm...
Didn't try that one.

Will give it a go and report back

Thanks