Brakes Looking to upgrade or get the most out of what you have stock? All brake discussions go here!

What size is this

Reply Subscribe

Search this Thread

Old

Jan 11, 2017 | 05:16 PM

#1

Thread Starter

Member

Joined: Dec 2001

Posts: 229

Likes: 0

What size is this

This is the rear line going to the axle, car is 1987 Camara lg4 sport coupe. It is near the gas tank vent in the back driver side fender well. Size? Bubble or inverted?. Haven't had time to pull apart yet and trying to gather some parts.

Old

Jan 11, 2017 | 05:33 PM

#2

Member

Joined: Dec 2016

Posts: 187

Likes: 2

From: Sebastian FL

Car: 87 firebird 86 c10 90 mustang

Engine: 383 sbc

Transmission: 97 t56

Axle/Gears: Moser 12 bolt 3.73

Re: What size is this

Looks like 1/4 inverted. You could put a open end wrench over it to see the size.

Old

Jan 11, 2017 | 08:07 PM

#3

$//<86TA>\\'s Avatar$

Supreme Member

iTrader: (15)

Joined: Aug 2006

Posts: 12,805

Likes: 107

From: Central NJ

Car: 86 Trans Am

Engine: 408 stroker sbc

Transmission: TKO600

Axle/Gears: Moser full floater m9, 3:70 trutrac

Re: What size is this

Quote:

Originally Posted by Biledriver

Looks like 1/4 inverted. You could put a open end wrench over it to see the size.

Everything is bubble flare after 83-84

IIRC the nut thread is 12mm1.0 and it is without a doubt metric iso bubble flare.

Old

Jan 12, 2017 | 07:08 PM

#4

Member

Joined: Jan 2012

Posts: 212

Likes: 75

Re: What size is this

Quote:

Originally Posted by //<86TA>\\

Everything is bubble flare after 83-84

IIRC the nut thread is 12mm1.0 and it is without a doubt metric iso bubble flare.

X2!

Old

Jan 14, 2017 | 01:03 PM

#5

COTM Editor

iTrader: (22)

Joined: Mar 2001

Posts: 10,415

Likes: 2,083

Car: '89 Firebird

Engine: 7.0L

Transmission: T56

Re: What size is this

On my 1989 Firebird it was M12 x 1.0 metric bubble flare. The line size is 6 mm, not 1/4 inch.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 12:46 PM.