[VA] B&M Forced Injection Supercharger with NIB FiTech 600HP Power Adder EFI Kit

Thread Tools
 
Search this Thread
 
Old May 31, 2017 | 12:56 PM
  #1  
disjaukifa's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 43
Likes: 0
From: Martinsville VA
Car: 1984 Chevrolet Camaro
Engine: 2.8L Carb V6 for now
Transmission: 1 speed 700r4 for now
Axle/Gears: 3.42 for now.
B&M Forced Injection Supercharger with NIB FiTech 600HP Power Adder EFI Kit

Hey Guys,

I have a used B&M Supercharger that I got on a running Camaro. I drove it for about 5K before the motor went, it was a crappy 305 (not even an HO 305), and I was planning on building a drag car with it and the FiTech 600HP Power Adder kit but it's not in the cards.

Anyway the supercharged is a B&M Forced Injection Supercharger which I believe is a 142 model and comes with all the pulleys and intake to slap on your Small Block Chevy. Currently it has a 750 CFM carb sitting on top of it at the moment which was running on my 305 before it bit the dust.

Some answers about the blower. I don't know the mileage, came on a running 1983 Camaro. I put about 5K on it before the 305 bit the dust. I never had a boost gauge on it, I don't know what boost it was pushing, but it was faster than any 350 stock 3rd gen Camaro I had driven. Great for making smoke! My gas mileage was horrible, but the smiles per gallon were through the roof.

Also included in a new in box FiTech 600HP Power Adder EFI Kit. I have FiTech EFI on my CJ-5 and it's amazing!

Asking $2900 for all of it. 1100 for the FiTech and 1800 for the blower.

TRADES! I'm only looking for a Wrangler TJ. That's it, I can add to the trade, I have a 200-4R with a TCI Rebuilt kit and new Torque Converter. I've got some serious maintenance coming on my Jeep Liberty CRD which is my daily and I desperately need something to travel in with my kids. If you have a Wrangler TJ and are willing to do some trading and depending on the TJ I might be able to add a little something to it, please let me know. If you have a Postal/Right Hand Drive Wrangler TJ is fine as well for some trades!

I'm not looking for anything else in trades sorry. Items are located in Martinsville VA.

Thank you!






Last edited by disjaukifa; Jun 1, 2017 at 11:19 AM.
Reply
Old May 31, 2017 | 02:00 PM
  #2  
3rdgenmaro's Avatar
Supreme Member
20 Year Member
iTrader: (9)
 
Joined: Dec 2004
Posts: 2,042
Likes: 18
From: Lincolnton, NC
Car: 88 IROC
Engine: 97 5.7 Vortec LT4 hotcam
Transmission: 700 r4
Axle/Gears: 3.73
Re: B&M Forced Injection Supercharger with NIB FiTech 600HP Power Adder EFI Kit

You thought about splitting it up? Might get some more bites that way.....
Reply
Old May 31, 2017 | 02:05 PM
  #3  
disjaukifa's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 43
Likes: 0
From: Martinsville VA
Car: 1984 Chevrolet Camaro
Engine: 2.8L Carb V6 for now
Transmission: 1 speed 700r4 for now
Axle/Gears: 3.42 for now.
Re: B&M Forced Injection Supercharger with NIB FiTech 600HP Power Adder EFI Kit

Originally Posted by 3rdgenmaro
You thought about splitting it up? Might get some more bites that way.....
I don't mind splitting it up, $1800 for the blower and $1100 for the EFI Kit.

Last edited by disjaukifa; Jun 1, 2017 at 11:19 AM.
Reply
Old Jun 3, 2017 | 03:59 PM
  #4  
355tpipickup's Avatar
Senior Member
iTrader: (5)
 
Joined: Feb 2005
Posts: 691
Likes: 0
From: meridian, idaho
Car: 92 1500p\u 2wd
Engine: 91 z28 tpi 355
Transmission: 91 700r4
Re: B&M Forced Injection Supercharger with NIB FiTech 600HP Power Adder EFI Kit

How tall is the blower from the china wall to the top of the carb? I have a 2.5" cawl hood on my 70 Camaro and id like to run this!
Reply
Old Jun 4, 2017 | 09:43 AM
  #5  
disjaukifa's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 43
Likes: 0
From: Martinsville VA
Car: 1984 Chevrolet Camaro
Engine: 2.8L Carb V6 for now
Transmission: 1 speed 700r4 for now
Axle/Gears: 3.42 for now.
Re: B&M Forced Injection Supercharger with NIB FiTech 600HP Power Adder EFI Kit

Originally Posted by 355tpipickup
How tall is the blower from the china wall to the top of the carb? I have a 2.5" cawl hood on my 70 Camaro and id like to run this!
7 5/8 inches in the front and 8 15/16 in the rear. I had a 2" cawl on my Camaro and the carb fit fine so your 2.5" cawl should have plenty of room!

Thanks
Reply
Old Feb 25, 2018 | 10:54 PM
  #6  
Rocket-Doc's Avatar
Member
iTrader: (11)
 
Joined: Jan 2004
Posts: 376
Likes: 1
From: Romeoville ,Il.
Car: 1990 RS/SS modified
Engine: 355ci, 113 heads, LT4 hotcam
Transmission: T5
Axle/Gears: 3.73 Eaton posi
Re: B&M Forced Injection Supercharger with NIB FiTech 600HP Power Adder EFI Kit

Whats the current situation on these parts?
Reply




All times are GMT -5. The time now is 02:10 PM.