I am replacing my heater core in a few days, and Im looking for any tips or shortcuts anyone might have. I've done this before, but never on an american car. The Haynes book will be my guide, but it looks like it says to take more crap apart than you really need...
91 Z28tpi
91 Z28tpi
Supreme Member
DONT FOLLOW HAYNES!!!!!
Just remove the panel below the passenger side of the dash, the cover panel, and then the shroud and heater core together. Takes no more than two hours to do. If you need a detailed description on how to do it, email me @ marc85Z28@aol.com
------------------
1985 Z28, Jasper Class 1 350, Edelbrock Performer intake, Dual snorkel air cleaner, K&N, Edelbrock headers, Catco 3" cat, Hooker 3" cat-back, Richmond 3.73's, Transgo shift kit, JET Stage 2 chip, Hypertech coil, Lakewood LCA's, Powertrax locker, SSM subframes, Centerline Auto Drag's
Just remove the panel below the passenger side of the dash, the cover panel, and then the shroud and heater core together. Takes no more than two hours to do. If you need a detailed description on how to do it, email me @ marc85Z28@aol.com
------------------
1985 Z28, Jasper Class 1 350, Edelbrock Performer intake, Dual snorkel air cleaner, K&N, Edelbrock headers, Catco 3" cat, Hooker 3" cat-back, Richmond 3.73's, Transgo shift kit, JET Stage 2 chip, Hypertech coil, Lakewood LCA's, Powertrax locker, SSM subframes, Centerline Auto Drag's