Help!!! Not firing!!
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 YJ
Engine: 406 TPI
Transmission: TH350
Help!!! Not firing!!
Got the new engine running, everything was well until while idling, it died. It seemed as if it just lost spark and now it will not even attemp to fire. I have fuel pressure and I have spark, what happened? The only thing that I haven't had a chance to check was if the injectors are firing, I am getting a set of noid lights tommorow to check that out, but I did replace the ingintion module with no changes. Someone please help me sleep tonight!!!! If it helps at all, it is a very fresh 406 (less than 45 minutes of run time), speed density system, all new sensors, all new parts in distributor, new computer, and chip was burnt to engine specs by TPIS. Please help!!!!!
#2
Junior Member
Thread Starter
Join Date: Mar 2004
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 YJ
Engine: 406 TPI
Transmission: TH350
I got it running, for anyone who happens to search and find this later it turned out to be the pickup in the distributor. I replaced the module with no change and eventually changed the pickup and it fired right up. Hope this helps in the future!
Thread
Thread Starter
Forum
Replies
Last Post