Updated, Mostly looking to get rid of the local only section right now so make a serious offer and come take it all

LOCAL ONLY SECTION
88 3.08 Posi Alum Drum Rearend $150 FIRM
16" Iroc Rims 85-88 style $200
86 Camaro Passenger Door Power (No Rust) $75
86 Camaro Driverside Door Power (No Rust) $75
86 Camaro Rear Bumper Cover (85-90 style) $25
Non-Gfx Style Front Bumper Extremely Clean in Primer $25
85-92 Camaro Style Bumper (a 3" Rip has been repaired and the bumper is stripped for paint) $40
89 Camaro T-tops Pair w/key $50
83 Driverside Ttop, Latch Style Nice shape $10
83 Camaro Gray Unripped Seats Set in Awesome Condition $120 FIRM (can ship buts its expensive)
86 Camaro BLACK Unripped Front Seats Very Nice shape $175 FIRM (can ship buts its expensive)
90-92 Main Dash (sorry no emblem and only has like half the vents, BUT NO CRACKS) $20

Will Ship Section

2.02 World Products Sportman ll Heads Only a year old WRL-011250 (summit part number) 64 cc Straight Plug, Have screw in studs, guide plates and all that fun stuff. Cost $850 last year looking for $400 Firm but a price drop

Edelbrock Torker ll P/N 5001 Intake Manifold $50
89 350 TPI auto Hypertech Thermomaster Chip $80
Camaro 3-Piece Rear Spoiler $25
Iroc Pass side Fog Light $50
Power Mirror Wiring and Switch $40 (white writing nice)
86-89 TPI Maf Sensor $75
TPI Rubber Boot (goes between the maf and throttle body) $15
Power Seat Track (6-way) $100
86-91 Hatch Pull Down (cleanest unaltered stock one ive ever seen) $100


Tons of Small Misc
Tail light Gaskets $3
Front Fender Brakets $5
so forth will hopefully get this all up shortly




NOW EVERYTHING BELOW IS PARTS I DON’T OWN AND AM LOOKING TO TRADE FOR
145 Speedo Cluster or Cyberdine Digital Gauges
85-88 Aftermarket TPI Runners
85-88 Aftermarket TPI Base
Aluminum Driveshaft
T5 manual Pedals
88 305 TPI T5 Hypertech Performance Chip (no big deal as the plan is a 350 come winter)
Headers w/Y-pipe (no tubes preferred and brand makes a big difference)
Spare 86-89 TPI Ecm w/chip
Also Possibly Interested in Whatever Misc TPI Stuff you have as spares are nice to have Ive learned, TPI Hypertech Chips, ECMs so forth all make great spares and so forth. Might want a AC Delete Box as I did take off my ac and the duct tape doesn’t look the best right now. Tail Light Black outs, Hatch Louvers if you have all the mounting hardware, 88-92 MSD Coil, and prob more as I like to work on third gens.

 

hypertech chip sold, but added my roller drag car project and some other stuff

 

pm sent

 

World Product Sportsman II heads 2.02 Valves $350 OBO is that for 1 or a set? How would they do on a crab 74 block SBC 355 with a eld RPM intake with headers? The heads are they complet? Could you please put a matching summit link for the heads thank you.

 

The heads are awesome and worked great on a 355 w headers, mallory dis, edelbrock intake and 750 carb, made huge HP at the wheels

Also fully updated the list

 

I am needing the fuel pump and regulator.
Hit me up with a shipped price and a paypal address.
Along with the part numbers!
Have cash ready to send!

 

can you possibly send some pics of the 750dp to z28maro@sbcglobal.net? very interested.

 

Extremely interested in heads, do you have any pics? PM me if you still have them.. Again very interested, cash in hand..

 

Photos of the Fuel Pump w/Regulator and the Carb

 

photos of the valve covers, edelbrock intake and radiator w/dual fans

 

i will take the pump and regulator

 

ill take the carb, pm me with info and total with shipping to 72205

 

how much to ship heads 32566

 

Shipping would be $80 for the heads and the photos are in my other posts check it out as many interested people it seems but first one with the money get them, thanks for everyones interest

Ill have photos of the BM ******** (both), Distributer and the block up tonight

 

pm sent

 

Accel Wires, Distributer photos

 

Heads 400+ shipping and are they complet? Almost Brand New 350 Style Thick Radiator w/ Aftermarket Dual Fans $120 OBO thats a 4 core radiator? Are they electric fans would it bolt right in my 85 z28?

 

no thanks on the 400 for the heads and not sure on the radiator

 

up

 

Hey thanks man! I got the intake and Megashifter! everything better then described! Thanks bud!
Please leave trader feedback.

 

tt top and some sold items were just removed

 

ttt, Someone must need a rearend

 

ttt

 

Updated, also added parts Im looking for in trades locally only though

 

up

 

What kind of aftermarker radiator do you have? Will you seperate the 350 tpi radiator from the fans? If so how much to ship that and battery hold downto 38381?

Thanks
Jason

 

Blah, figures when I can get rid of something the person lives far away. I have a Fiberglass Daytona hood sitting in my garage.

 

Extremely interested in the hoods. Can you send me pics? Whats the cheapest you can do shipped to FL 33018 ?
Thanks
killerz28@juno.com
----------
just realized you want a hood, nt selling one. sorry,my bad

 

updated, Mostly Local Now

 

up

 

stil have the quicksilver shifter? im in palatine and mayb u want some parts to trade, i jiust did a th350 454 swap in my car so have many left over parts from a 305 tpi 5 speed

 

sorry I just sold the shifter otherwise I would have been more than happy on trading since your so close, lmk if you need anything else I have

 

up

 

i'd love a disc brake posi rear end however I'm in WA and it'd cost a fortune to ship

bump for ya!

 

up

 

Make offers on the local pickup stuff if you can come get it this weekend and kind of updated the rest but it still needs lots more work

 

Can you send pics and info. about the 88 posi to bpeeters1@new.rr.com

 

Hey I just wanted to tell you my experience with cyberdyne guages. I have a complete set in my 83 camaro and they looked great except it only took 3 months for the water temp, fuel, and oil pressure displays to start burning out, then one more month before the amp guage went. No probs with the speedo or tach yet. They have a lifetime warranty and cyberdyne is happy to exchange them but I have to pay the shipping. Maybe it's the Texas heat that kills 'em. I just wanted to let you know what might happen if you get them.

 

Details on the Rear
88 3.08 Posi Alum Drum Rearend, Complete Drum to Drum, good brakes has 85K on the whole thing I took it off my car to change to a bigger gear and discs.

As for the cyberdyne gauges Im sorry to hear you had problems as when I had my 85 and put a set in they worked great for over a year of me driving the car with them in and no problems actually, it was just kind of a pain to get a couple of the gauges to read right was my issue,

 

updated

 

can i get pics of the 3 pc spoiler? jcro_61 @ hotmail.com