[Sold] '730 ECM SD 90-92 w/ hypertech 305 TPI/M5 Memcal
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2010
Posts: 5
Likes: 0
From: Marxland
Car: '91 Formula WS6, 2005 CTS-V
Engine: 4.8 & 80mm, stock LS6
Transmission: T56, T56
Axle/Gears: 3.23, 3.73
'730 ECM SD 90-92 w/ hypertech 305 TPI/M5 Memcal
SOLD
Serv. No. 01227730 ECM out of my 91 TPI/T5 Formula. Cover and screws are included. Has a Hypertech memcal in it. I don't know much about the memcal, except for the fact that the speed limiter is gone, and that 305 ran it's *** off.
I was using it and a Moates adapter to run my 383 TPI, so I had to take off the white memcal cover to get it to fit in the ECM; I believe I still have it and will check for it today or tomorrow. Everything was working fine when pulled last week. Going to a 76mm 4.8 route.
Make offer. Also have a stock k-member from the same car, for free, if anyone needs it.
Serv. No. 01227730 ECM out of my 91 TPI/T5 Formula. Cover and screws are included. Has a Hypertech memcal in it. I don't know much about the memcal, except for the fact that the speed limiter is gone, and that 305 ran it's *** off.
I was using it and a Moates adapter to run my 383 TPI, so I had to take off the white memcal cover to get it to fit in the ECM; I believe I still have it and will check for it today or tomorrow. Everything was working fine when pulled last week. Going to a 76mm 4.8 route.
Make offer. Also have a stock k-member from the same car, for free, if anyone needs it.
Last edited by 92TPI383; Nov 22, 2013 at 08:27 AM.
Thread Starter
Junior Member
iTrader: (1)
Joined: Mar 2010
Posts: 5
Likes: 0
From: Marxland
Car: '91 Formula WS6, 2005 CTS-V
Engine: 4.8 & 80mm, stock LS6
Transmission: T56, T56
Axle/Gears: 3.23, 3.73
Re: '730 ECM SD 90-92 w/ hypertech 305 TPI/M5 Memcal
$70 shipped w/memcal
Thread
Thread Starter
Forum
Replies
Last Post
88SS6SPEED
Engine/Drivetrain/Suspension Parts for Sale
7
Nov 11, 2015 07:05 AM