[WI] '91 Camaro Convertible 327 5-speed $3500
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: Lake Mills, WI
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
'91 Camaro Convertible 327 5-speed $3500
I'm looking to sell or trade my project Camaro. I have it all done and drivable. I'll save the long paragraph and just list the parts that are in it.
The block is a Chevy 327 bored .030 over
Dart Iron Eagle Cylinder Heads
Aluminum Roller 1.6:1 Roller Rockers
Edelbrock Performer RPM
Heads and intake are ported to match
Holley 750 mechanical secondaries
Comp Cams Xtreme Energy
MSD 6A Super HEI Kit
Hedman Headers
Centerforce Dual Friction Clutch
Magnaflow exhaust
Hurst Shifter
What it needs:
Let's face it all projects are never 100% complete. It needs a electronic T5 speed sensor. Almost impossible to find, will probably have to come from a junk yard. It needs to have the heater core hoses hooked up; it's a summer car I never needed it. It also needs an alignment and a pair of tires. there may be some minor leaks, I haven't driven it enough to find out.
Pictures and video of it driving are here.
https://www.dropbox.com/sh/hj17sna6l...4YlcMWpBa?dl=0
At this point I need the space so I'll entertain anything that's not another project.
The block is a Chevy 327 bored .030 over
Dart Iron Eagle Cylinder Heads
Aluminum Roller 1.6:1 Roller Rockers
Edelbrock Performer RPM
Heads and intake are ported to match
Holley 750 mechanical secondaries
Comp Cams Xtreme Energy
MSD 6A Super HEI Kit
Hedman Headers
Centerforce Dual Friction Clutch
Magnaflow exhaust
Hurst Shifter
What it needs:
Let's face it all projects are never 100% complete. It needs a electronic T5 speed sensor. Almost impossible to find, will probably have to come from a junk yard. It needs to have the heater core hoses hooked up; it's a summer car I never needed it. It also needs an alignment and a pair of tires. there may be some minor leaks, I haven't driven it enough to find out.
Pictures and video of it driving are here.
https://www.dropbox.com/sh/hj17sna6l...4YlcMWpBa?dl=0
At this point I need the space so I'll entertain anything that's not another project.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM